|
L67 harness for fiero (Page 1/1) |
|
jmac87tt
|
APR 09, 11:27 AM
|
|
Hello new to fieros! Hope this is in the right section. I have a 3.8l v6 SC that I'm putting into my 86 Fiero. I've done some searching and not having much luck locating an engine harness. I have the original harness for the 3.8 but it's from a 00 Bonneville SSEI so most of the wiring diagrams and color codes don't match up. Because it's an "h body" I'm told. I was wondering if any one has a good source where to locate these or even better if I have to purchase one, someone who even fabricates these to make them plug and play with the Fiero connectors. Thanks for any help.
|
|
|
olejoedad
|
APR 09, 12:08 PM
|
|
|
|
Dennis LaGrua
|
APR 10, 10:14 AM
|
|
As long as you have the PCM that goes with that with harness I believe wiring gurus like Joe can come up with a working 3800 swap harness. ------------------ " THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite. "THE COLUSSUS" 87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H " ON THE LOOSE WITHOUT THE JUICE "
|
|
|
|