 
     |
| Brakes are spongy after ebrake was pulled. (Page 1/1) |
|
Curlrup
|
APR 11, 03:35 PM
|
|
|
So my 1986 SE 2.8 lost it's starter a few weeks ago. Got that sorted, but the tow truck driver who hauled my dead car home pulled the ebrake. After telling him not to. I have had the car a year and never had a working or soon to be not working ebrake on everyone of my 4 Fieros over the years. Ever since my brakes are spongy and once and a while the brake lite comes on. There is fluid in the master cylinder and I get pressure back when I pump them up some. I think I need an adjustment in the back and this is ebrake related?
|
|
|
|
Dennis LaGrua
|
APR 11, 05:05 PM
|
|
|
You might want to try bleeding all four wheel cylinders to see if that helps improve the pedal. Spongy = air in the lines. ------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "
|
|
|
|