Does anyone have the correct torque specs for this? Clutch didn't come with any install instructions
Reached out to SPEC, but was wondering if anyone here has the info
thanks
hnthomps
APR 25, 12:36 PM
I do not remember the exact max torque specifications but do have a SPEC Stage 3 clutch coupled to a Getrag 282 and a 3800 SC Series II. I am generally happy with this but would get a SPEC Stage 3+ if I had to do this again. It is supposed to be a bit less on/off and thus more "streetable".
Nelson
Raydar
MAY 01, 11:58 AM
Were you talking about bolt torque readings? Factory says 15 lbs, for the pressure plate bolts. (Yeah. I know. I thought it should be more, too. Stretched the hell out of my first set of bolts. )
[This message has been edited by Raydar (edited 05-01-2022).]
Will
MAY 03, 11:22 AM
Dunno what the flywheel bolt torque spec is.
15 ftlbs is perfectly fine for the pressure plate to flywheel bolts. Because the radius of the bolt circle is so much larger, that joint hand handle all the torque it needs to handle, even with smaller lighter bolts.
)