 
     |
| new headliner problem (Page 1/1) |
|
Wayne Renninger
|
MAY 09, 02:07 AM
|
|
|
Put a new headliner in 84 with sunroof, screwed up the back side, to short by 1/2 inch.Does anyone have a sollution for a wider molding to cover that up? I know it won't be stock but the headliner board was in bad shape and I tried to save it . I glued the material really well and couldn't stretch it enough. Help! Thanks
|
|
|
|
Australian
|
MAY 09, 06:02 AM
|
|
|
I used a thicker foam backing and glued it to the foam then used suede liner and glued it alt together with heat rated glues both spray on and paint on for all the backings there was foam between the layers which disintegrates making the material sag down. If it really is even shorter use a thick foam.
|
|
|
|
Mike in Sydney
|
MAY 09, 08:13 PM
|
|
|
|
|
Dennis LaGrua
|
MAY 10, 08:59 AM
|
|
|
Why not cut a small strip of material and glue it to the end. If you are careful it will be hardly noticed. ------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "
|
|
|
|