3.8 swap (Page 1/1)
bobobrazil MAY 13, 08:15 AM
who has a 3.8 v6 supercharge swap with auto trans? what axles did you use with the swap? grand prix gtp axles???? did you have to use custom engine mounts and brackets?
cam-a-lot MAY 13, 08:32 AM
Hello

please use the search function, as this topic has been covered hundreds of times, in detail, with lots of good pictures and write-ups. Good luck with your swap
Steel MAY 13, 09:04 AM
Take a look at this thread, should help with most of your current/impending questions:

https://www.fiero.nl/forum/Forum2/HTML/139530.html

Would recommend darth from http://www.gmtuners.com to get a basic tune done on your PCM after completing the physical part of the swap, to get the car going, then you'll need to have it tuned properly at a dyno tuning shop.

Also for motor and trans mounts Fierorog makes some very nice options and you can contact him on Facebook, he has other swap parts as well: https://www.facebook.com/Fi...rts-185617138853928/

If you need to have your swap harness made for you I believe 'olejoedad' makes them. My apologies if this is incorrect, he should be here on the forums to message. Also 'Phonedawgz' here on the forum use to make them and I belive his website is: https://reddevilriver.com/ - I'm uncertain if he still is active though.

Good luck with your swap~

[This message has been edited by Steel (edited 05-13-2022).]