C307 / C308 - door power accessory connectors (Page 1/1)
dguy SEP 13, 07:00 AM
Hi,

Would anyone happen to have a GM or aftermarket part number for the individual pins and sockets that make up the door power accessory connectors which are hidden behind the kick panels?

-d.

------------------
1988 Formula: L67'd by FIEROFLYER.
1985 SE: Dead 2.8, stalled L67 swap.

[This message has been edited by dguy (edited 09-16-2022).]

theogre SEP 13, 11:29 AM
Is very unlikely you can get new shells. Many Shells wasn't available even from GM Dealer Parts even in 80's and 90's.
But the Pins are very likely a standard GM/Packard/Delphi part common to many connectors.

⚠️ Very likely PW etc shells have 2 PN for each "pins" in both shells because PW has larger wires. IOW you need 4 PN to replace all "pins."

Dig thru web stores for new "pins."
Think Is either "Pack-con" or "56 series" connectors but some web stores don't list as such and have own PN.

haven't looked at it in years and don't have time to pull connector out

To release 56 series females is same as my Cave, Defect & Connection notes w/ different or no TPA.
Pack-con and 56 males are a bit different and doesn't want big things to release them.

56 series females are use to connect to most switches and relays but did have male pins and shells.

Think Pack-con is same pin type use in Fiero C100, C500 etc w/o locking bolts and TPA.

------------------
Dr. Ian Malcolm: Yeah, but your scientists were so preoccupied with whether or not they could, they didn't stop to think if they should.
(Jurassic Park)

The Ogre's Fiero Cave

dguy SEP 16, 12:41 PM
Thanks ogre. I fortunately don't need new shells, the end of one of the male power lock terminals broke off when I separated the connector to diagnose a power window issue. I was able to release one of the other male pins and take a couple of good photos of it. Between that and some of the names you mention I should have some decent material to search for.