IC options for supercharger (Page 1/1) frockfiero NOV 20, 08:17 PM Buttoning up my engine and looking to add an IC to my SC build but I'm shy on the 1200 price tag for the ZZP IC. Is this the only option? can I run the same IC that I see on turbo setups? Intercooler I'm Looking at Current Build: Stage 3 Intense Heads Forge pistons ZZP rockers OE-R Comp Rollers 2.5 Pulley 345 E85 Fuel pump cam-a-lot NOV 20, 08:31 PM would help if you specify the engine La fiera NOV 20, 09:11 PM Obviously it might be a 3.8L V6 Supercharged. claude dalpe NOV 20, 09:21 PM Frockfiero, You must have an intercooler between the supercharge and your intake and not at the entrance of the supercharger Because the supercharge is the one that produces the heat, same thing as with a turbo, the intercooler is installed after the turbo and not before. frockfiero NOV 20, 09:39 PM quote Frockfiero, You must have an intercooler between the supercharge and your intake and not at the entrance of the supercharger Because the supercharge is the one that produces the heat, same thing as with a turbo, the intercooler is installed after the turbo and not before. This makes sense now, I needed it spelled out I guess. Fie Ro NOV 22, 05:52 PM You might find a used set for less $ but still there's a lot of work in the install. Need to fab 2 IC coolant lines to the front and room for the radiator. Custom fuelrails. With the rather small 2.5 pulley you need intercooling and likely larger injectors.