 
     |
| Water pump pully (Page 1/1) |
|
Ethan Y
|
MAR 27, 10:32 AM
|
|
|
I have bought a Carquest Premium New Premium Water Pump it didn't have a included pully Mine is pretty stuck on my old one and in the event it breaks I haven't been able to find a replacement anywhere. I have a V belt pully and can only find serpentine. Any help with parts places would be helpful.
|
|
|
|
ArthurPeale
|
MAR 27, 01:54 PM
|
|
Did you remove the pump before you unbolted the pulley ? If not, you can probably pry it a bit to get it to come off, once you remove the mounting bolts.
Wait - which engine ? I think the L4 has a different process than the V6.
|
|
|
|
IMSA GT
|
MAR 27, 01:55 PM
|
|
What year and engine?
The V6 pulley unbolts with 4 bolts and the 4cyl pulley requires a puller.[This message has been edited by IMSA GT (edited 03-27-2023).]
|
|
|
|
ArthurPeale
|
MAR 27, 03:32 PM
|
|
| quote | Originally posted by IMSA GT:
The V6 pulley unbolts with 4 bolts and the 4cyl pulley requires a puller.
|
|
Aha, I was correct, thanks to you fine folk. Most of my practical experience comes from my 86 SE V6, but I've read enough on here to know a little about the Duke.
|
|
|
|
Ethan Y
|
MAR 27, 03:33 PM
|
|
|
it is a 4 cylinder we know how to get it off it needs a puller but it is defiantly rusted on and we don't know if we can get it off without damage. The hope is we get it off and press it on the new pump but if we cant remove it without damage i can not fine another pully for it
|
|
|
