What lubrication points should an 1988 GT have? (Page 1/1)
John W. Tilford
JUL 22, 10:10 AM
What lubrication points should my 1988 GT have? A diagram would be great. I'm a bit worried when the Grease Monkey guy goes through their checklist of things they've done/checked and mumbles something about no lube fittings.
Spoon ------------------ "Kilgore Trout once wrote a short story which was a dialogue between two pieces of yeast. They were discussing the possible purposes of life as they ate sugar and suffocated in their own excrement. Because of their limited intelligence, they never came close to guessing that they were making champagne." - Kurt Vonnegut
[This message has been edited by Spoon (edited 07-22-2023).]
Patrick
JUL 22, 07:10 PM
For an '88, there's none in the back, and three on each side at the front. Easy access with the front wheels removed.
Vintage-Nut
JUL 23, 10:17 AM
Front Lubrication
6 Factory Grease Fittings on the Front as Patrick said, "three on each side (L&R) and none in the rear."
Edit: Added "What lubrication points should my 1988 GT have?" 1 @ on the Top of Upper Ball Joint 1 @ on the Bottom of Lower Ball Joint 1 @ on the Tie-Rod End
If your GT doesn't have them, it means 'Aftermarket '
Here is a quick pic of their locations by cvxjet in this thread:
quote
by cvxjet: Some replacement ball joints do not have grease fittings.
