Hey guys I have a 88 fiero with a 3.4 swap and the engine starts and runs dies off about a minute or 2 later then it will start right up and do the same..Here are some of the issues Rpm is at 750 start and does not match the tach which shows around 1200 even when revving its off running rich.Also battery starts off at 11.2 volts then goes to 12.1 when revving the engine code 35 MAP 2.2 volts o2 cross counts 45 IAC 102 steps spark advance 45 degrees would appreciate some feedback to find the root cause of my problem
[This message has been edited by Atlanta1 (edited 08-06-2023).]
Patrick
AUG 06, 07:33 PM
quote
Originally posted by Atlanta1:
Also battery starts off at 11.2 volts then goes to 12.1 when revving the engine
I can't believe those readings were taken with an accurate voltmeter.
Atlanta1
AUG 06, 07:48 PM
I used a fiero scan tool I was able to go to 13 volts around 1800 rpms which my tach showed me around 3000 rpm.
Patrick
AUG 06, 08:08 PM
I don't believe the engine would even turn over with only 11.2 volts.