 
     |
| 2 Speed to Single Speed Fan Switch (Page 1/1) |
|
BruhMans06
|
NOV 29, 11:19 AM
|
|
So ive run into an issue as I was reinstalling my wiring harness onto my 2.5. I had to replace the engine I had since the person who owned it before me caught the engine on fire, and the replacement i bought is a 1985 engine. I haven't had any issues with the electronics since I swapped the distributor and other miscellaneous electronics that are specific to the 1984 engine.
So i need a new fan switch, and its a 2 speed since my car is an 84' 2m4 with AC, but the cable looks weird and the switch also looks weird. I cant seem to find a 2 speed switch that will fit the plug but i can find tons of single speed switches.
Is there an easy way to convert it to a single speed, or is there a place i can find a 2 speed switch?
Thanks much!
------------------
James Bird[This message has been edited by BruhMans06 (edited 11-29-2023).]
|
|
|
|
82-T/A [At Work]
|
NOV 29, 02:49 PM
|
|
| quote | Originally posted by BruhMans06:
So ive run into an issue as I was reinstalling my wiring harness onto my 2.5. I had to replace the engine I had since the person who owned it before me caught the engine on fire, and the replacement i bought is a 1985 engine. I haven't had any issues with the electronics since I swapped the distributor and other miscellaneous electronics that are specific to the 1984 engine.
So i need a new fan switch, and its a 2 speed since my car is an 84' 2m4 with AC, but the cable looks weird and the switch also looks weird. I cant seem to find a 2 speed switch that will fit the plug but i can find tons of single speed switches.
Is there an easy way to convert it to a single speed, or is there a place i can find a 2 speed switch?
Thanks much!
|
|
Hi James, I could be wrong, but what you're looking at is actually the engine temperature sensor, not the fan switch. The fan switch (sensor) looks like this for all years:
What you probably need is this from the Fiero Store, so you can use the newer sensor: https://www.fierostore.com/...px?s=61899&d=169&p=1
But if you want to get the original sensor for the 84 model year, you can get that here: https://www.rockauto.com/en/moreinfo.php?pk=941150
|
|
|
|
theogre
|
NOV 29, 07:01 PM
|
|
Yes, Above is not a fan switch or gauge/light sender.
Is ECM sensor & installed wrong. That Sensor need to be in T-stat tube.
84 Rad Fan uses 2 switches. See https://web.archive.org/web.../~fierocave/fans.htm------------------
Dr. Ian Malcolm: Yeah, but your scientists were so preoccupied with whether or not they could, they didn't stop to think if they should.
(Jurassic Park)
The Ogre's Fiero Cave
|
|
|
|
fierosound
|
NOV 30, 11:24 AM
|
|
|
|
|
