Fiero store fuel sending unit too long? (Page 1/1)
Wayne Renninger JUL 23, 04:18 PM
The new fuel sending unit is too tall to fit in the tank? Anyone else have this problem, and how did you correct it?
cartercarbaficionado JUL 23, 07:22 PM

quote
Originally posted by Wayne Renninger:

The new fuel sending unit is too tall to fit in the tank? Anyone else have this problem, and how did you correct it?


picture. they may have sent you the wrong year one
Wayne Renninger JUL 23, 11:22 PM
I called the Fiero store, they said they sold hundreds with no problems, I measured the old unit ,about 1/2 '' shorter. The Fiero store says the only differance is between 4 and 6 cyl wiring? A freind bought the one from Rodney Dickman , is 1/2' shorter and comes complete with evrything about $100 cheaper. I plan to cut the stainless tube and reweld the mount .
cartercarbaficionado JUL 24, 05:47 AM

quote
Originally posted by Wayne Renninger:

I called the Fiero store, they said they sold hundreds with no problems, I measured the old unit ,about 1/2 '' shorter. The Fiero store says the only differance is between 4 and 6 cyl wiring? A freind bought the one from Rodney Dickman , is 1/2' shorter and comes complete with evrything about $100 cheaper. I plan to cut the stainless tube and reweld the mount .


unfortunately they lied to you as they have been to me recently.
they did sell a 87-88 unit to you or decided to let their manufacturing get away with making parts wrong again (so far its 4 speed v6 cables, all the relays for the early headlights, the entire bushing kit for the 88, the upper balljoints for a 88 actually don't fit and are in full contact with the frame at full droop and mostly bottomed out. etc.)
I wish for the premium they charge they would actually test fit the parts coming off assembly semi regularly for proper fitment
Dennis LaGrua JUL 24, 01:50 PM
The early Fiero gas tanks were ten gallons. The later ones were larger at 12 gallons. Could that be the difference in the sender that you're using. There were also reports of the float sticking up on some of the Fiero store units. I would make sure that the float sits exactly as it did on the unit you removed.

------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "

theogre JUL 24, 03:00 PM

quote
Originally posted by Dennis LaGrua:
The early Fiero gas tanks were ten gallons. The later ones were larger at 12 gallons. Could that be the difference in the sender that you're using.

Maybe.

The two tanks are roughly the same dimensions but later tank has different fill port plumbing to fill the tank w/ more liquid fuel & move most of the "free space" that allows liquid to expand safely to the aux tank under the body on the right side of car to allow 11.x fuel cap.

Minor difference in just location @ the end in the tank of the big Liquid Fill line &/or Fill Vent line can set max liquid before Station Pump nozzles trips off.

Related ⚠️ Warning: If the pump assembly fails to seal, more so on 87-88 tanks, then Very Easy to have Gas on the pavement when you fill the tank. Worse if you try to "stuff" the tank even a little after the station nozzle trips auto shutoff. That's how I "found" the tiny leak in http://www.fiero.nl/forum/F.../HTML/146198.html#p4 because 87-88 tanks next to zero "free space" & pin hole size leaked enough to stay put to allow evaporation before doing anything.

------------------
Dr. Ian Malcolm: Yeah, but your scientists were so preoccupied with whether or not they could, they didn't stop to think if they should.
(Jurassic Park)

The Ogre's Fiero Cave

82-T/A [At Work] JUL 27, 04:46 PM
The new sending unit is vastly better quality (in my opinion) than the old one; however, it is a little bit longer than the original 84-86. This is not a huge problem, really... you just need to bend the bottom of the sending unit slightly so that it doesn't push against the bottom of the tank. My daughter did this for her 1985 Fiero, and it fits just fine.