Heater Hoses for 84-86 Fiero w/ AC? (Page 1/1) 82-T/A [At Work] AUG 17, 10:34 PM Hey guys, I was just going through my parts, and realized that I don't have replacement heater hoses for the engine compartment. Specifically, the one that connects the heater line (that runs under the car) to the one on the side of the engine bay, and then the second hose that connects from that to the intake manifold. I'm also lacking the one that goes from the water pump to the body heater line (inlet line I guess it's called). Anyone know where to get these? Are they just no longer available? I see on the Fiero Store, only the hoses for NON-A/C cars. Not sure what the difference is... but maybe I misunderstand? This is for my daughter's 1985 Fiero 2m4 SE 5-Speed Thanks! cartercarbaficionado AUG 19, 08:07 PM quote Originally posted by 82-T/A [At Work]: Hey guys, I was just going through my parts, and realized that I don't have replacement heater hoses for the engine compartment. Specifically, the one that connects the heater line (that runs under the car) to the one on the side of the engine bay, and then the second hose that connects from that to the intake manifold. I'm also lacking the one that goes from the water pump to the body heater line (inlet line I guess it's called). Anyone know where to get these? Are they just no longer available? I see on the Fiero Store, only the hoses for NON-A/C cars. Not sure what the difference is... but maybe I misunderstand? This is for my daughter's 1985 Fiero 2m4 SE 5-Speed Thanks! Rodney sells some of them he had to source. as for the crimped heater hose line it has to be made now. just cut the crimp and flare it somehow or just shove 3 inches of hose onto it and use 5 clamps and it shouldn't come off. if you can't find them use the non ac and just know they are too short or route funny. a good replacement is some metal line with rubber at each end nowadays. I just did it on a 350 swap to simplify the process