Great cupholder idea (Page 1/1)
gregr75 SEP 27, 04:44 PM
I private messaged the originator of this post, and posted a reply to it, but its in the mall section so not a lot of eyes on it...

can anyone explain in more detail how the installation works? i imagine the rivnuts are in the cupholder but im not sure how the screws go in and if its just carpet holding up the whole thing


https://www.fiero.nl/forum/Forum4/HTML/079049.html
fieroguru SEP 27, 05:48 PM
I am pretty sure he installed the rivnuts in the plastic panel that attaches to the side of the center console skeleton.
However, to do this there has to be holes in the carpet as well.
gregr75 SEP 27, 09:00 PM
OK, nice, I think I'm going to try this. I don't mind two small holes in the carpet
Dennis LaGrua SEP 28, 03:43 AM
Two wide stick-on Velcro strips might work well to hold the cupholder in place and will not disturb the originality of the car

------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "

TheDigitalAlchemist SEP 29, 12:09 AM
google "Cubicle clips" or "Cubicle Pins Partition Pins for Cubicle Office" or "Nap Tags" or "Partition Pins"
IMSA GT SEP 29, 05:09 PM

quote
Originally posted by TheDigitalAlchemist:

google "Cubicle clips" or "Cubicle Pins Partition Pins for Cubicle Office" or "Nap Tags" or "Partition Pins"



Have to agree with this solution. Even though they come with double sided tape to attach to the item, I'd glue the pins on to the cup holder. Then you're guaranteed a permanent mount. Then just hook these through the carpet.

[This message has been edited by IMSA GT (edited 09-29-2024).]