|
Tang-Band sub-woofer upgrade (Page 12/13) |
|
fierosound
|
DEC 13, 09:54 AM
|
|
quote | Originally posted by Boostdreamer:
I got mine installed and is working very well. At first it was buzzing. It took some time to figure it out but the buzz was from the four sides of the box vibrating against the four sides of the wooden insert. It was tight but not tight enough. |
|
I smeared a thin film of silicone around the edge of the board before pressing it into the housing. Never had any buzz.
|
|
|
E.Furgal
|
FEB 08, 11:58 AM
|
|
quote | Originally posted by Lurate:
Would be sweet if someone would 3D print some ABS inserts rather than having to cut MDF or oak. I'd buy a couple right now. |
|
I may, and use the same material that I made the 4x10 speaker adapters that I sold out of,, just thicker sheet, or two bonded together.
|
|
|
pokeyfiero
|
JUN 19, 01:15 AM
|
|
any update on availability of these or a better replacement?
|
|
|
fierosound
|
JUN 19, 06:27 AM
|
|
|
|
E.Furgal
|
JUN 21, 11:02 AM
|
|
I bought speaker adapters (sold in pairs) made for Harleys to adapt 6.5" speakers in the 5.25" hole, I should know in a few weeks when I get the time if this is a bolt together deal, if so.. it make adding a 6.5" sub so much easier..
|
|
|
pokeyfiero
|
JUN 23, 02:45 PM
|
|
No I just hoped for cheaper
|
|
|
Jefrysuko
|
JUN 25, 01:10 AM
|
|
|
|
fierosound
|
JUN 25, 11:14 AM
|
|
|
|
Jefrysuko
|
JUN 25, 02:35 PM
|
|
fierosound, of these three speakers how would you think they would perform in relation to each other?
|
|
|
fierosound
|
JUN 25, 03:18 PM
|
|
quote | Originally posted by Jefrysuko:
fierosound, of these three speakers how would you think they would perform in relation to each other? |
|
I have absolutely no idea! You'd have to buy all 3 and try them. All I can tell you is how well the Tang-Band I HAVE works. Those who want to buy something else and experiment are free to do so.
I used the Tang-Band on the recommendation of Bigfieroman who did the initial research. http://www.fiero.nl/forum/A...090219-2-076432.html[This message has been edited by fierosound (edited 06-25-2015).]
|
|
|