|
SPY PICS!....first secrets of the GTR exposed! (Page 5/72) |
|
Fie Ro
|
AUG 20, 06:58 AM
|
|
|
|
Fie Ro
|
AUG 20, 08:50 AM
|
|
found another related picture: 1st pair is my backup set second pair: the modified ones which are on my car for years now. (Kolja see I did your mod! ) third pair: the Honda prelude altezza's. Got them prewired now and almost ready to go in the back (finaly after 2 years!)
|
|
|
Fie Ro
|
AUG 20, 09:23 AM
|
|
another double post grrrr. [This message has been edited by Fie Ro (edited 08-20-2003).]
|
|
|
cire36
|
AUG 21, 12:22 PM
|
|
How did you make the rear lower facia addition?
|
|
|
LZeitgeist
|
AUG 21, 03:39 PM
|
|
| quote | Originally posted by Fie Ro: nascar vents molded in, inline with the stock vents (and functional)!
|
|
Those aren't 'nascar vents'... those are 'NACA ducts'. They are named after the National Advisory Committee for Aeronautics (the forerunner to NASA, the National Aeronautics and Space Administration). They're also pretty cool-looking. Good work! EDIT - oops!! Somebody already covered this, and in much better detail. Tha's what I get for not reading the rest of the thread... :: blush :: ------------------ Patrick W. Heinske -- LZeitgeist@aol.com -- 1988 Red Fiero Formula - 1st Place - Stock Coupe - FOCOSEVA 2000 - 3rd Place - Stock Formula - FOCOA Nat'l 2001 - Class Winner - 1982 to Present - Tarheel Tigers All-Pontiac Show 2001 - Class Winner - Fiero: All Years - Tarheel Tigers All-Pontiac Show 2002 (working on an Automoda convertible conversion...) [This message has been edited by LZeitgeist (edited 08-21-2003).]
|
|
|
Fie Ro
|
AUG 21, 03:44 PM
|
|
the rear lower facia really is the original mockup.there is a small basic woodenframe which I covered with a kind of foam (L+R side) Then I sculpted the foam to the lines of the bumper. Covered it with some layers of fiberglass (thinner layers towards the original bumper). Then houres of smoothing and sanding. It sounds quite easy but I made many changes during the process... Well.this was made from scratch! I have several drawings made but the final product is totally different! I have some doubts whether these two different materials will hold up. I have made a few repairs and drive the car like normal to see if serious cracks appear. If so I will have to make a mold and a one piece product. I finally have the right gelcoat and release wax to make a good mold. I already destroyed some small molds due to wrong materials. So It takes some confidence to try that again... But I better do the job well now, then discovering cracks in my fresh paint later ------------------ http://members.lycos.nl/fierofiero/html/fiero.html 1987 Pontiac Fiero GT soon to be GTR /Honda Altezza taillights/cupdiffusor/M3 sideskirts/roofscoop/custom front/front hoodscoop+detailing 1969 Chevy Suburban Rate me if you can!
|
|
|
Fie Ro
|
AUG 21, 03:55 PM
|
|
| quote | Originally posted by LZeitgeist: Those aren't 'nascar vents'... those are 'NACA ducts'. They are named after the National Advisory Committee for Aeronautics (the forerunner to NASA, the National Aeronautics and Space Administration). |
|
I am sorry . I thought "naca" was a short name for "nascar". I also know they are in the wrong direction. First this is just an designlike idea. I made them a bit functional to vent hot air out (trust me they're at a quite good position for venting). And water coming in thru the vents/ducts follows the same route as the water from the sides of the decklid. ------------------ http://members.lycos.nl/fierofiero/html/fiero.html 1987 Pontiac Fiero GT soon to be GTR /Honda Altezza taillights/cupdiffusor/M3 sideskirts/roofscoop/custom front/front hoodscoop+detailing 1969 Chevy Suburban Rate me if you can!
|
|
|
Smoooooth GT
|
AUG 21, 05:26 PM
|
|
| quote | Originally posted by Fie Ro: (finaly after 2 years!) |
|
HAHA.. Sound's like me... FINALLY IS CLOSE!! Looking Cool!!
|
|
|
doublec4
|
AUG 21, 09:19 PM
|
|
Get some pics of those taillights installed! It'll be one of a kind for sure. Excellent work. ------------------ 1986 Fiero SE
|
|
|
bryson
|
AUG 22, 12:24 AM
|
|
Car looks GREAT! Did you make your side scoops as well? Are they the whole panel? I like the way they look. Any chance of any on the market?Thanks!
|
|
|