Project "off the Rickst'er Scale" begins (Page 6/117)
Bozzie MAR 16, 10:37 AM
This images is larger than 153600 bytes. Click to view.

Door coming together.....this is so time comsuming !!
Bozzie MAR 16, 10:41 AM
This images is larger than 153600 bytes. Click to view.
Car is coming together. Ive been working on making in ge gaps tighter in the door seams. The factory gap is just way to much. Now is the time to bring it in. Pics to come. Also on the way is Amida's 512 front bumper )))))) I'll be installing that hopefully next week and making a custom splitter kinda like Whodeanie's. Everybodys cars are such a inspiration to me and my project...thank you
GADJet MAR 16, 11:03 AM
what body filler are you using between the rear fender and the lower quarter panels and the front upper and lower fenders?

[This message has been edited by GADJet (edited 03-16-2012).]

Bozzie MAR 16, 11:29 AM
GADjet......all seams are fiberglassed inside and out. Im useing duraglass filler over it. It has glass fibers in it for reinforcement.
Bozzie MAR 26, 12:40 PM



Door off and ready to glass the inside. Car mostly in primer now and the lines are lookin good

------------------
http://i252.photobucket.com...ec/2007_12240001.jpg

Bozzie MAR 26, 12:41 PM


Door gettin a layer of glass on the inside. This seams to be the easy'st part ! Nothin like glassin from the top ! It made such a big difference on the rigity of the door.

------------------
http://i252.photobucket.com...ec/2007_12240001.jpg

Bozzie MAR 26, 12:43 PM

While i had the door off i figured id ad alittle to the door edge. The gaps seam so big around the doors for some reason. Figure 3/16 all the way around would be alittle nicer

------------------
http://i252.photobucket.com...ec/2007_12240001.jpg

Bozzie MAR 26, 12:44 PM

Door back on and the gap looks alot better. Also flushed the door to body gaps and did alittle more filling and sanding.

------------------
http://i252.photobucket.com...ec/2007_12240001.jpg

Bozzie MAR 26, 12:47 PM

Pulled the nose off in preperation for Amida's 512. Anyday now.....................................

------------------
http://i252.photobucket.com...ec/2007_12240001.jpg

BV MotorSports MAR 26, 04:40 PM
I like the hood vent. Does it require cutting of the sheet metal (chassis)?