TAZMNDVL - Build - 350 QB - 6sp - chop ... and more (Page 1/44)
DrCPU JUN 01, 09:45 AM
First off - I call my '88GT The Tazmanian Devil (aka TAZMNDVL).
I chose this name because this is what I look like.


The Fiero has always been a mean little car and I think the name fits it well - even better now since the conversion.

Archie has been real busy and I have preety much all of the photos from my build.

If everyone is OK with it I'll start putting up pictures of the job - from start to finish. I'll add all I can insofar as descriptions - but it likely won't be as extensive or technically correct as Archie might do - but heck - this should be better than nothing at all - right?!

SOME BACKGROUND

I bought my first Fiero in 1988 - a black, decked out '88GT. I met Archie in 1991 at the FOCA meet in Pigeon Froge Tennesse, under the shade of Dolly Pardon's statue (Not sure if it's Parton - sorry to all of her fans who own FIEROs =;^0 ) I knew when he started up the F40 with a 350 carb set-up, that I'd do the conversion one day. I sold that car in 1996 for $10K. I bought my current '88GT in August of 2000 for $6.5K - it had 50k km on it and the interior was in excellent shape.

I'm using Canadian dollars and Kilometers for everything. You guys figure it out!....

The car had been sitting in a barn (near Belleville, Ont) for some time and the guy I bought it from was the second owner. He has about 8 Fieros and has his '86GT lowered with an LT1 in it. Anyway, he needed some cash and I took the '88GT off his hands. I had a lot of niggly little problems at the start as it had been sitting for a long time - it still had the original rubber on it. Over the next year I was plagued with engine problems that ended when the oil pump failed - causing lifter failure - and that started me on the road to my first rebuild. I had the engine bored out and rebuilt (original V6). I was happy with it save for all the problems I was having with the ECM. I change the ECM, pickups, coil and finally found the culprit being shorted tach filter. I was just going through a divorce after 27 years of marriage and decided I'd spend a big chunk of change on a brake and engine upgrade when I got the proceeds of the settlement. You guys know how this goes - sell the house, divide the assets etc. I came out of it with a 2001 1500HD Chevy Silverado Crew Cab, my '96 Harley FXDS-CONV, my '88GT and my trailer - and a pile of cash......

I called Archie in July of 2005 and got pricing for my intitial order that consted of the following:

Convert Automatic to 5 speed
Coil over suspension - all around
Big Brake upgrade
350 HO (Quick Burn) V8

Seems straight forward enough, right?! Ahhh the male mind - never happy leaving things alone...

I told Archie he could have my car over the Winter and I'd pick it up in the Spring of 2006 - no set date.

I trailered the TAZ to Archie's place in October 2005. Attached is a pic of the set-up I used.



I'll add to the story and post the pictures - about 50 - at a rate of 10 or so a week. If I can find time to do this faster I'll do it.

Patience - young grasshoppers!
jscott1 JUN 01, 10:17 AM
MORE!

John Boelte JUN 01, 10:33 AM
Sounds like a dream come true on many levels. I'm looking forward to this!
88White3.4GT JUN 01, 04:29 PM
YES *adds to favorites*
madcurl JUN 01, 06:51 PM

quote
Originally posted by 88White3.4GT:

YES *adds to favorites*




Me too.

------------------

"Anyone can make a copy of something, it may look good but it ever is the real car, make something from your imagination, something unique, something nobody has, anything is possible and, ideas can be a reality."

Mr. Pat JUN 01, 07:20 PM
you better post some more pics or im gonna whack your pussy!!!!!!!!.......for some reason that doesnt look right to me. but ill kill that cat!!!!!
.
.
.
.
.
.
.
not really, i just want to see pictures.
DrCPU JUN 02, 09:17 AM
Ok - Ok - Ok.....

So let's see. I'm at Archie's in the October of 2005 and It's been about 12 years since I've met him. I found his place no problem thanks to Google maps.

I drove from Mississauga in the 1500HD rig on a Thursday and arrived in Rockford Thursday at about midnight. 1000km drive in twelve hours - plus border crossing - without any fuss or muss. I did not make any hotel reservations as I'm sure there will plenty of space avaialble. I've riden my Harley all around the continent and never had problems finding a place to stay - save for once near Oshkosh during flight week - but that's another story! Hmmm, on second thought I shoulda booked something. Seems the Chrysler plant south east of Rockford (Bellville - or Bellview - not sure) was closed for two weeks while they re-tooled! I did manage to find something - but had a tough time as I brought my dog with me - min daxi - named Ginger. She's with me wherever I go and has travelled more than most humans - I figure.

For anyone who hasn't been to Archie's here are shots of his place and some of the cars he had in the shop in the fall of 2005. The red GT-40 has been sold since then - and the Ferrari replica wasn't there last week either. He has many new projects - right Curly! - but I've been sworn to secrecy on the projects - so not to ruin any "comming outs" so to speak.

Archie's Place


Ferrari 328 replica (Sold ?)


IMSA Special


GT-40 (SOLD)


Anyone who has visited Archie knows you cannot escape without chatting about your and his cars. I spent the rest of the morning talking about things I was dreaming about doing with my TAZ and he with his past stories. We could have gone on for days without repeating a single story!

Archie walks me around some more and asks me what I wanted to do with the intake for my 350. I order the TPI setup and was leaning towards painting the intake red to keep the heritage of the original Fiero. He tols me he wanted me to see something - and showed me an engine he had that had the TPI chromed. Two seconds later there it is.. OH MY GOD!

Another engine with Chrome TPI - not mine...


I asked Archie "How much more will this cost?". He said - get ready for this "Oh not much more maybe $1,100." What understood was a total of $1,1000 - what I found out when I got my revised estimate months later - was $1,100 on top of the cost of the TPI. Welcome to the world of customising your baby.... I can hear the registers churning, and my bank account draining way too fast - but heck - ya only live once. So I say "Do it!"

Archie sold my V6 engine and the guy who got it ran away with a bargain. Newly rebuilt - it was just broken in. Oh well - I thought - at least the $650 I got for the engine and Tranny would offset the cost of the chrome work. Archie then showed me my new crate engine - and yes it's in a crate....

350 HO (Quickburn) Crate engine - ALL MINE!


I spend a few more hours chatting with Archie and he tells me that he is bidding on a wrecked Pontiac G6 - with the 6 Speed on eBay. He expects to win and the auction closes in a few days. We talk about the 5 speed Getrag I was going for - with cryoed gears etc - and we decide to wait until he has a chance to get the 6 Speed to see if he can make it work. Detroit will be selling the 6 Speed in the spring - and the $1,600 for a brand new 6 speed tranny - that is rated better for the 350 - leaves me with that fealing that I've just openned the bank account tap once more...

I drive back to Mississauga Friday afternoon and stay in Port Huron so I can bring back the two boxes of Corona Cigars I had shipped to Archie - across the border... need to be in the US for 72 hours to get them by customs without paying duties or taxes....

Now all I gotta do is wait until Spring and try not to change my order too much... yeah - dream on!!!

That's it unitl next week. I don't have Internet at my trailer - so stay tuned on Monday!!
DrCPU JUN 05, 09:05 AM
....continued... for your reading enjoyment!

The next couple of months I call Archie up and ask how life is going. He won the eBay bid for the smashed up Pontiac G6 and the 6 speed. He spends the next month or two making it fit - oh yeah he decides to put an LT or LS into his new Solstice....

I get some bad news at the end of February. My mother passes and I'm picking up my two girls (15 1/2 going on 30) to go to my mother's funeral. On the drive from Mississauga to Ottawa (5 hours give or take) I call Archie...

"How's it going?" I ask. "Not bad - not bad at all" he replies. "I've got more work to take care of than I like and am running a little behind getting the Roadster and Solstice ready for the end of March - for Daytona". "You're car has the suspension done - in the front, and we've cleaned up the engine bay - new firewall and have painted the rest of the engine bay and craddle". I ask him how the 6 Speed work is going and he replies - "No problem getting it to fit and work." "I've designed and ordered six throw out plates. Do you still want to go with the Getrag 5 speed or would you like a six speed? I ask - "Is GM selling them in a crate yet?" - he responds "Yup!".

Hmmmm - The brain thinks for what seems like an eternity... Let's see - 20 yr old tranny with newer gears - vs a brand new crate 6 Speed for around $1,600... Hmmmm...seems like a no brainer - yeah - that's the ticket - some quick math and I fugure the account can take it. "It's a go for the six speed. Any idea how long it will take? Archie says "No big deal - it's easier than getting a 5 speed together"

First mod to the order - if you don't count the Chrome SP TPI ......

Now secretly I've been visiting PFF and looking into all the chops. "Archie, How much for a chop?". Without much hesitation he says "$3995 - Why, you thinking of doing that too!?". "If you are it's best for me to do the chop before I put the engine in and we are ready to do the engine conversion any day!". I told him "I need to think about this for a bit. I'll get back to you in a couple of days after I've had some time to think about it a little" Archie replies "OK, we'll hold off until you get back to me!"

My kids have been listening to the conversation, but don't quite understand the conversation. I keep driving along the 401 thinking.... thinking....

About three minutes later I hit redial on the cell - "Archie? DO IT" =8^) So much for giving it much thought. I fiugre the account will be pretty much drained by this latest change - but think I might escape with a couple of thou left - enough to pay for taxes when I get it accross the boarder - and maybe enough for a half assed paint job. Ohhh how wrong I was. "How much more time are you going to need to do the chop?" I ask. Archie replies "About four weeks". I ask hopefully, "Do you think it will be ready for the end of March? Little did I know how much work Archie had on the go - Daytona etc.. Anyway, Archie says "I'm not sure, but I'll do what I can". Anyone who knows Archie will smile at this. For what I know of him - unless he says "I can have it ready for XXX date" That it isn't going to happen. I don't need the TAZ - but I miss it. The winter in southern Ontario has been mild and I'm aching to drive my "poorman's vette".

So now I have the order changed to a chop... Archie sends me some pics of "da boys" ready to do what they do best....

This is the last time the TAZ will be seen in stock config....


Ready - set CHOP!


Look what did to my car Ma!


Going back together..



He also sends me some pics of the engine and test configuration....


And the guts to the TAZ!



Hope this holds everyone till mid week!
madcurl JUN 05, 12:06 PM

quote
Originally posted by DrCPU:

....continued... for your reading enjoyment!

Now secretly I've been visiting PFF and looking into all the chops. "Archie, How much for a chop?".





Secretly "lurking" hmm....? I guess bumpin' the thread paid off, hehe. I love your write-ups...keep it comming.
DrCPU JUN 05, 01:36 PM
Well, I guess I spend a lot more time reading and learning than I do "speakin' up". I belonged to a Harley Forum and learned early on how to "can't we just get along" =;^0

I'm a professisonal - so you know the saying. "I know more and more about less and less until I know everything about nothing!"

The other side of the coin is to be a generalist - "Who knows less and less about more and more until he knows nothing about everything"!!