SEARCHING FOR A SET OF AUS STAGE 2 SCOOPES: will PAY fee to borrow !! (Page 1/8)
87 Fiero GTP FEB 27, 10:41 PM

Hello EVERYONE !!

I am looking for anyone who has a complete set of AUS Stage 2 scoops.

I would like to make an offer to borrow them, with a security deposit and with compensation. The project is to make molds and clone the product. I am not a dreamer, I have the capability, resources and funding to complete the project. I am not doing it for the money, just purely to get a few sets for myself and sell a limited run of maybe 10 to 25 to help offset the costs.

Does anyone know if anyone acquire the original molds:
Last chance for stage 2 side scoop moulds before they go in the bin

Happy to entertain all and any offers or options.


thanks,

Mark
riley MAR 05, 10:26 AM
no stage 2s but I have stage 3s
yamaha94 MAR 05, 05:03 PM
Hey another woodbridge person! not many of us with Fieros. There are 3 of us now!
IMSA GT MAR 05, 11:15 PM
Mark, as far as I know, Jim still has those molds. He offered them to myself and also Tedd who made all of the parts when Doug at the FieroWarehouse was selling parts. We both declined due to the fact that the side scoop molds were at the end of life and would have to be remade.

I will say that Jim includes ALL of his molds including the molds for door speaker pods as well as a few extras so if you can get ahold of them and don't mind reworking/remaking some of the molds, it is worth it.

PM sent....
87 Fiero GTP MAR 06, 12:12 AM

quote
Originally posted by riley:

no stage 2s but I have stage 3s


Really appreciate the thought, but stage 2 is the goal. SORRY !!
87 Fiero GTP MAR 06, 12:17 AM

quote
Originally posted by IMSA GT:

Mark, as far as I know, Jim still has those molds. He offered them to myself and also Tedd who made all of the parts when Doug at the FieroWarehouse was selling parts. We both declined due to the fact that the side scoop molds were at the end of life and would have to be remade.

I will say that Jim includes ALL of his molds including the molds for door speaker pods as well as a few extras so if you can get ahold of them and don't mind reworking/remaking some of the molds, it is worth it.

PM sent....




I actually just had a lengthy conversation with Tedd a few days ago and he was not sure what happened to the original molds.

Also, without success, have not received a reply from Jim on this forum. If you have a Batline to him, I would VERY much appreciate any assistance !
cam-a-lot MAR 06, 06:30 AM
Hey Mark

I am local as well. Unfortunately I no longer have the Stage 2 scoops I used to have... BUT- if you do get your hands on a set, I can assist with the following

1.) I can assist with laser digitizing of the scoops to create STL/Point Cloud data to create surface models on

2.) CNC machining of molds at little or no cost if you decide to try and build these out of polyurethane. Would be so much nicer than fiberglass, though cost to produce would be quite a bit higher too..

I am always in the GTA, so if I can help, just PM me

Peter
MinnGreenGT MAR 06, 12:34 PM

quote
Originally posted by 87 Fiero GTP:

I actually just had a lengthy conversation with Tedd a few days ago and he was not sure what happened to the original molds.

Also, without success, have not received a reply from Jim on this forum. If you have a Batline to him, I would VERY much appreciate any assistance !



Have you tried emailing him directly ( jim "at" jadeweb "dot" com "dot" au ) or connecting with him on Facebook?

[This message has been edited by MinnGreenGT (edited 03-06-2020).]

87 Fiero GTP MAR 07, 03:01 AM

quote
Originally posted by cam-a-lot:

Hey Mark

I am local as well. Unfortunately I no longer have the Stage 2 scoops I used to have... BUT- if you do get your hands on a set, I can assist with the following

1.) I can assist with laser digitizing of the scoops to create STL/Point Cloud data to create surface models on

2.) CNC machining of molds at little or no cost if you decide to try and build these out of polyurethane. Would be so much nicer than fiberglass, though cost to produce would be quite a bit higher too..

I am always in the GTA, so if I can help, just PM me

Peter




Appreciate the offer ! Update you when I know more.
87 Fiero GTP MAR 07, 03:08 AM

quote
Originally posted by MinnGreenGT:


Have you tried emailing him directly ( jim "at" jadeweb "dot" com "dot" au ) or connecting with him on Facebook?





Appreciate the information, IMSA GT is giving it a shot, hopefully he has some success. Otherwise, I will give it a try.


Thanks !!