86 GT Part-out (Page 1/4)
Cheeze_87 APR 01, 08:49 PM
If you see something you want let me know. Willing to take anything off or apart. Chassis was hit drivers side and someone poorly grafted on a new front end. I have a few other Fiero parts laying around off camera. Or make an offer for all this stuff. Didn't get the title unfortunately, just wanted the body and didn't realize there was a mostly clean back half underneath it! Shame to send it to the scrapper with so many rust buckets like mine still in the road.


[img]https://images.fiero.nl/us erimages/Cheeze_87/20230401_135503.jpg[/img][img]https://images.fiero.nl/userimages/Cheeze_87/20230401_135 603.jpg[/img][img]https://image s.fiero.nl/userimages/Cheeze_87/20230401_135642.jpg[/img][img]https://images.fiero.nl/userimages/Cheeze_87 /20230401_135725.jpg[/img][img] [img]https://images.fiero.nl/userima" TARGET=_blank>https://images.fiero.nl/use...ges.fiero.nl/userima ges/Cheeze_87/20230401_141809.jpg[/img][img]https://images.fiero.nl/userimages/Cheeze_87/20230329_192509.j pg[/img]
MaxxPower1968 APR 03, 02:34 PM
Do you have the driver side carpet trim that goes over the hand brake lever?
Cheeze_87 APR 03, 07:15 PM
This?
Fiero 86GT V6 APR 06, 08:08 AM
Hi there,

I'm looking for a working fuel sending unit, with the float attached, for an 86 gt v6. The fiero store has one but it was too long by a few inches is causing problems. Also looking to buy the center console armrest if it's undamaged. If the radio area went unmodified and undamaged I am looking for the plastic face plate piece that fits over the radio and a/c controls.

[This message has been edited by Fiero 86GT V6 (edited 04-06-2023).]

MaxxPower1968 APR 06, 09:42 AM

quote
Originally posted by Cheeze_87:

This?




I'm looking for the plastic cover. Mine is cracked and missing a few chunks.

It looks like this
MulletproofMonk APR 06, 02:05 PM

quote
Originally posted by Cheeze_87:

If you see something you want let me know. Willing to take anything off or apart.



Oh Lord. I just scrapped that Fiero you brought down to me in 2020. The neighbors loved that.

------------------
-Brian

My 87 GT Poly Suspension Upgrade (all pics) thread
Removing the roof panel
My HUD install thread
Modified stock air canister and base to 3.5 inch for 3800na

MulletproofMonk APR 06, 02:14 PM
double

[This message has been edited by MulletproofMonk (edited 04-06-2023).]

Trinten APR 06, 10:09 PM
Do you have the A/C hose section that holds the orifice tube?

Does it look like it's in good shape?

If so, does $15 plus USPS flat rate small box shipping work for you?
Fiero 86GT V6 APR 10, 02:31 PM
Just checking in, haven't heard back from OP and wanted to see if the fiero parts were still there.
Cheeze_87 APR 12, 02:11 PM

quote
Originally posted by MaxxPower1968:


I'm looking for the plastic cover. Mine is cracked and missing a few chunks.

It looks like this



This one cleaned up pretty well. Made sure it is not cracked or warped. $10 + shipping? I have more trim and interior parts if you want a deal on stuff. Trying to make it worth the shipping for ya, whatever that is going to be. Have a preferred shipper?