Engine conversion AC hoses now for sale (Page 2/2)
handymanpat JUL 10, 05:17 AM
I just got my series 2 in and running and ready to go.
I have both the compressor side and fiero side hoses for you and would need the switch port.
How do I get these sent to you and what is my total cost of I supply the two fittings and have the switch port installed?
Thanks Pat


quote
Originally posted by KissMySSFiero:

Fiero AC conversion hose sets

I am now building AC hose sets for engine conversions.
I’ve received enough hose, ferrules, switch port fittings and even boxes to ship. So I can get started now with minimal turn around.



I’m set up right now to do series 2-3800 swapped cars immediately.
The Series 3 3800 compressor is slightly different, but would be simple for me to do.
LS4 swaps would be easy to start as I have one I’m working on here.

I’m willing to do other swaps but will require some measurements and pictures

Prices are $150 shipped(lower 48) if you send me your Fiero side and donor compressor side fittings. Payment thru PayPal at SSFiero@aol.com
This includes the transducer port spliced in and new hose.

Fiero side-green rectangle
Transducer or switch port- blue oval
Donor compressor side-red oval



I can supply some(not all) donor side compressor fittings for $25, or $175 shipped
Many are available new on rockauto for $35-$60

If you don’t need the switch port, it’s $30 less.
No switch port
$120 shipped if you send cores
$145 shipped if I supply the donor compressor side

Unfortunately I don’t have enough of the Fiero side to cover cores. So I would need yours to build.
If you need one contact Todd Weikal at https://thefierofarm.com or todd@weikal.com he’s shipped them to me before

If being shipped outside of the continental US, the box is 30x6x6 and weighs 4lbs. My zip code is 34689. I’ll cover the first $25.
Lmk if you have any questions
SSFiero@aol.com


This is a reminder to replace your orifice tube and accumulator/dryer




------------------
pat moody

XxdjxX89 JUL 13, 08:52 PM
What’s the part number for the switch port?
Dennis LaGrua JUL 23, 09:00 PM

quote
Originally posted by XxdjxX89:

What’s the part number for the switch port?



Its basically a 10mm switch port. In the past I was able to buy just the fitting and braze it to the high side line by drilling a small hole at the firewall manifold.

------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "

MulletproofMonk AUG 16, 10:06 AM
Dang. Should have bought a couple sets to put on the shelf.

------------------
-Brian

My 87 GT Poly Suspension Upgrade (all pics) thread
Removing the roof panel
My HUD install thread
Modified stock air canister and base to 3.5 inch for 3800na