 
     |
| WTB 1988 V6 manual project car near me in California (Page 2/2) |
|
TVS
|
JAN 14, 11:57 AM
|
|
|
Hey Bob, sent you a pm would like to see pics of your Fiero. Thanks Tom
|
|
|
|
BowtieBob
|
JAN 19, 12:44 AM
|
|
Pardon the delay, but we’ve been having a hellova time here with wind, fires and power blackouts. Expecting a new round starting this Monday.
I’ll try posting some pics from my phone, but please be patient if this doesn’t go well. I’ll chech this post on a PC tomorrow.
|
|
|
|
BowtieBob
|
JAN 19, 12:49 AM
|
|
|
|
|
BowtieBob
|
JAN 19, 12:59 AM
|
|
|
|
|
Dennis LaGrua
|
JAN 19, 09:30 AM
|
|
| quote | Originally posted by BowtieBob:
What paused these 4T60 swaps in the Fiero community is the lack of speedo housings that mechanically mate to the overdrive tranny AND to the Fiero electronics. I solved that problem with an adapter that allows you to use the original speedo sensor from your TH125. I'll be posting that in another thread and link to it from here.
|
|
On one of my Fieros I run a 4T65eHD, on another I run the 4T60e. On both transmissions simple electronic interface conversion circuits were used to drive the speedometer. No need for anything mechanical.
------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE " [This message has been edited by Dennis LaGrua (edited 01-19-2025).]
|
|
|
Vintage-Nut
|
JAN 21, 08:03 AM
|
|
|
|
|
cliffw
|
JAN 21, 11:40 AM
|
|
| quote |
odometer: 2,000,000
|
|
You don't see that too often ... ever. I does not scare me. It is very nice.
|
|
|
|
Maloso
|
JAN 27, 08:31 PM
|
|
| quote | Originally posted by BowtieBob:
TVS, if you want, I have an '88 Fiero GT I have title on and can give to you for buying Cliff a couple beers. The GT is white, but not pretty. No damage though. It died with a spun bearing/rod kock and has been sitting long enough to be frozen now, but it's an automatic. You would need to swap over your '86 manual bits and mod the harness a little. A number of people have done this swap.
Here's a link I found on that subject:
https://www.fiero.nl/forum/...L/000077-3.html#p113
...and a parts swap list from that same link:
Converting to a manual requires all these parts from your donor.
tranny
axles
shifter assembly
2 shifting cables
clutch pedal assembly
hydraulic clutch line
master cylinder
slave cylinder
flywheel
clutch set <---- buy new - no reason using a worn one
Plastic frame with boot to cover shifter assembly
I'm in So Cal. You would need to bring a trailer. |
|
Hi Bob,
I'd be interested in taking the car off you hands if you still have it I'm in the SFV.
Tony
|
|
|
|
