 
     |
| Personalized decklid vents and other things (Page 1/49) |
|
silver 85 sc
|
NOV 20, 09:55 PM
|
|
Hi everyone,
My first thread on these has slipped into oblivion. So let's start over. First the vents:
.jpg)
.jpg)
_(640x363).jpg)
(Daneele When you get pictures I would love to post one here along with Tyler's Dream I did for Jay.)
How about a club logo?
.jpg)
.jpg)
Just the standard Fiero logo runs $50.00. If you want something that I have to convert from a photo or other logo (see Betty Boop) pricing will vary. I have been doing one set of each notchback and fastback for the 3 shows I attend (Dells, Heartland, and Fierorama)
Next the badges:
.jpg)
These will run $15.00 ea
I can vary the size the one pictured is 3 3/8" tall
The key chains:These run $7.00 ea with a "brush finish" $5.00 to polish.
And when I get too many key chains I make wind chimes out of them: (note the show keychains)
.jpg)
The Pontiac Fiero "disc" runs $16.00 Key chains not included
Special rockers (look below the door):
Need a better rear bumper Pontiac to replace the bad plastic ones?:
$6.00 ea. Does not include body tape to adhere them to the bumper. The 3M double face body tape works really good.
Project I am working on:
.jpg)
and yes I have been working on the fastback for over a year. This one is driving me crazy, but I think I can get something acceptable.
Sometimes I just get crazy: This thing is 59" wide x 60 something tall
.jpg)
Special run:
.jpg)
I can do show or special occasions PM me to work things out.
Now for the bad news. I just became a grandpa this week, our beautiful grand daughter will take priority over me getting things done. So if I don't get back to anyone right away be patient and you may have to gently remind me on some occasions.
|
|
|
|
Parkman
|
NOV 20, 10:18 PM
|
|
| quote | Originally posted by silver 85 sc:
Hi everyone,
My first thread on these has slipped into oblivion. So let's start over. First the vents:
(Daneele When you get pictures I would love to post one here along with Tyler's Dream I did for Jay.)
How about a club logo?
Just the standard Fiero logo runs $50.00. If you want something that I have to convert from a photo or other logo (see Betty Boop) pricing will vary. I have been doing one set of each notchback and fastback for the 3 shows I attend (Dells, Heartland, and Fierorama)
Next the badges:
These will run $15.00 ea
I can vary the size the one pictured is 3 3/8" tall
The key chains:These run $7.00 ea with a "brush finish" $5.00 to polish.
And when I get too many key chains I make wind chimes out of them: (note the show keychains)
The Pontiac Fiero "disc" runs $16.00 Key chains not included
Special rockers (look below the door):
Need a better rear bumper Pontiac to replace the bad plastic ones?:
$6.00 ea. Does not include body tape to adhere them to the bumper. The 3M double face body tape works really good.
Project I am working on:
and yes I have been working on the fastback for over a year. This one is driving me crazy, but I think I can get something acceptable.
Sometimes I just get crazy: This thing is 59" wide x 60 something tall
Special run:
I can do show or special occasions PM me to work things out.
Now for the bad news. I just became a grandpa this week, our beautiful grand daughter will take priority over me getting things done. So if I don't get back to anyone right away be patient and you may have to gently remind me on some occasions.
|
|
|
|
|
Parkman
|
NOV 20, 10:20 PM
|
|
|
Great creativity and innovation. Love the deck vents; thumbs up.
|
|
|
|
Fiero Thomas
|
NOV 20, 10:29 PM
|
|
|
|
|
IIKool
|
NOV 21, 07:52 AM
|
|
| quote | Originally posted by Fiero Thomas:
intrested in these. Shoot me a pm at what I am looking at ect
|
|
Me Too
|
|
|
|
Back On Holiday
|
NOV 21, 08:11 AM
|
|
I love these, now I have a question... how much do you charge for a plain set of fastback vents? Looking to possibly incorperate these into a project i'm doing this winter
|
|
|
|
silver 85 sc
|
NOV 21, 01:20 PM
|
|
I was hesitant on posting these:
These are about 63-64" long and shipping becomes and issue. I need these to ship them:
http://www.uline.com/Produc...-Tubes-with-End-Caps
As you can see I have to buy 15 and they come freight. So up front I have a lot of packaging and freight costs. The other issue is material. If I can get my hands on SCRAP material drops about 15 x 72 I can do these for about $65.00 per set plus shipping and packaging. If I can't get my hands on scrap the price jumps to $100.00 plus shipping and packaging. These are made out of 16 ga stainless steel and are u shaped on either end with holes that line up with existing fasteners on the car. The center of these is just an angle. So the way to go is if I can get commitment on say 10 then I could proceed. I do have one piece of scrap material and can make 1 set out of it. Shipping will be the next issue.
The other route to go is to meet me at a show. As I have stated before I attend the Dells Run, Heartland show, and Fierorama. They do fit in the car, but will take away room for a passenger. Or install at the show.
Rich
|
|
|
|
silver 85 sc
|
NOV 21, 01:28 PM
|
|
| quote | Originally posted by Back On Holiday:
I love these, now I have a question... how much do you charge for a plain set of fastback vents? Looking to possibly incorperate these into a project i'm doing this winter |
|
What exactly do you mean by a plain set of fastback vents? Do you mean a set without anything cut into it? Like a solid blank. I cannot duplicate the factory vents if that is what you are looking for, nor do I have any.
But to hopefully answer your question, A blank set of GT vents just cut to shape and bent, with no logos or slots just solid metal, would run around $40.00 + shipping
|
|
|
|
gtxbullet
|
NOV 21, 02:40 PM
|
|
I have the 2010 Dell Run Vents on my 88 coupe.
bought them with the #001 keychain, and the RIP keychain at registration.
awesome stuff. I'll try to get pictures up to add to represent the fine products.
|
|
|
|
Fiero Thomas
|
NOV 21, 03:06 PM
|
|
|
|
