I finally have everything I need to start producing reproduction RPO sheets for the Fiero! The RPO sheet can be customized in just about any way that you would like. You may want to add or customize codes depending on if you did an engine swap, added power mirrors to your car or for many other reasons. A full list of RPO codes are available on my site, with some custom ones for engine swaps and such.

FieroDecals.com

I have researched and am using the same fonts that GM used back in the day to reproduce the RPO sheets. They are virtually impossible to distinguish from the originals.

Legally it is NOT an issue to replace your RPO sheet. The RPO sheet is simply a reference of items installed on the car from the factory. The VIN# is duplicated on the RPO sheet just for consistency & reference, and is NOT a legal means of identifying the car in any way. Now, lets see who is the first to post about legal issues, and ignore this paragraph of the first post completely...... wait for it...... wait for it.......

Here is an original RPO sheet someone ordered:


.
.
Here is a reproduction of the RPO sheet above:



.
.
The bar colors at the top and bottom of the RPO sheet differ between different years, and production runs. I have seen one 1988 RPO that had a black bar at the top with white lettering, and no bar along the bottom. This being the case, it is important that you get as clear of a photo of your RPO sticker that you can, and upload it it through the order form. This way I have a visual reference to create your sheet correctly.

Speaking of the order form, this is what it looks like:




.
.

.


You enter in your own RPO codes into the form, and provide all the other information, and I will then create your replacement RPO sheet for you.

There are 2 options for the sheet, either a sheet printed on heavyweight card stock, and then laminated. This is the way the factory originals are done. The other way is to print your RPO on weatherproof polyester sheeting. Either way, you simple peel off the back of either, and stick it on your car.


Here is a photo of my car the day I purchased it, you can see the discoloration and fading of the RPO sheet, as well as the stickers on the radiator:



After re-painting the front compartment, I then put in my new RPO sheet, as well as new stickers on the radiator (Also available at FieroDecals.com):



The pricing is $18.95 for the card stock or the self adhesive polyester sheeting. Shipping is included in both prices in the continental US. Outside the US, I will get a quote for shipping and charge that exact price, and not a penny more.

To order an RPO sheet, go to FieroDecals.com and click RPO sheets at the top of the page.

[This message has been edited by JohnWPB (edited 10-03-2024).]

------------------
--Jeff aka mrfred8
- 88 Yellow GT
- 86 Silver SE / 3800 s/c
Fieros For Sale

Hey John
I'm needing a special RPO Sheet one that has the first and last fiero made RPO sheet. It is to apply on a special project Trophy and not on a car fender .... let me know if this is possible
regards
Danyel

BTW you still have a typo on your site's contact me page


------------------

My Build Thread
Tylers Toy

[This message has been edited by Danyel (edited 09-15-2013).]

quote Originally posted by Danyel: Hey John I'm needing a special RPO Sheet one that has the first and last fiero made RPO sheet. It is to apply on a special project Trophy and not on a car fender .... let me know if this is possible regards Danyel BTW you still have a typo on your site's contact me page

Sure, that shouldn't be a problem. Fill out the RPO sheet, and in the notes section, describe what you want altered and such. You can also upload a sketch / diagram of what you are looking for. I will work on it here, and send you a proof to look at in email.

As for the typo, I had to dig to find it, as I had no idea what you were referring too, but it is fixed now

.

quote Originally posted by pcar: I checked out your website, no sticker sets for 87's?

Sorry about that! I just finished re-creating the 1987 emissions sticker a couple days ago, and totally forgot to add it to the order form. So, yes, I do have 1987 sticker sheets now

NOTE: I still need high resolution scans or photo's of all year Fiero's with the 2.5L 4 Cyl engine. If anyone could upload them through the "Contact me" page, it would be greatly appreciated, and I can then offer sticker sets for all 5 years of the 4 Cyl Fiero's.

[This message has been edited by JohnWPB (edited 09-16-2013).]

Just a note:

Anyone that orders an RPO sheet, the shipping will be delayed a couple days. I am leaving to drive to Paris Island, South Carolina in the morning. My nephew is graduating from boot camp, and becoming a United States Marine. (I could not be more proud.... even thought I was in the U.S. Army ) His graduation is on Thursday, and I will be returning Saturday evening, and will catch up with orders, and ship them out on Monday.

[This message has been edited by JohnWPB (edited 09-18-2013).]