3800 SWAP PARTS (Page 1/13)
Fierorog APR 12, 10:52 PM
Well here it is. As you may have seen, I have started building some parts for the 3800 engine swaps. I have most of my parts laser cut from 1/4 in plate. And then I build the parts on jigs. I pride myself on quality parts and fast service.

The lower alternator bracket for the 3800 uses your 99 - 03 alternator. Comes with the bolts to mount it to the engine. $85 + shipping

The tensioner / dogbone bracket uses a tensioner from a ford taurus, but does not come with the tensioner unit. It also is the top engine mount ( dogbone ) that is adjustable to fit your needs. It uses the original fiero V6 dogbone. Comes with the bolts to mount it to the engine. $120 + shipping

These two brackets make up what you need to run the belt with the A/C or an A/C delete pulley . I have the belt number and what tensioner to use.

The motor mount I build is for the 84-87 and uses the fiero rubber motor mount or the Rodney Dickman's poly mounts. $110 + shipping

88 engine mount NOW AVAILABLE !! $110 + shipping

4T65E tranny mounts NOW AVAILABLE !! Include all bolts for mounting to engine.
These mount to the OEM Fiero rubber mounts. Both front and back $135 + shipping

I can ship any or all parts for $20 in the US or $60 to Canada.

I also have 3800sc or 3800na conversion flywheels. These are new flywheels that I turn down and balance to be used in a series II & III engine. The machining was done to enable the clutch to fit properly into the Fiero manual transmission. $270 + shipping.

Please ask any questions you have. Email is fierorog@gmail.com and my cell is 319-939-1285
Thanks, Roger

Contact FIEROFLYER if you need a wiring harness. He does great work.

Thanks to all of you that have bought form me. Please post some pics if you can.

















[This message has been edited by Fierorog (edited 02-20-2020).]

MstangsBware APR 13, 12:46 AM
Just instaled one of Fierorog low mount Alt setups this evening. Fitment was damn near perfect and installed in less then 10 mins. If ur looking for a well built low mount thats plug and play then this is ur setup. Will use again for future swaps...
djlamp14 APR 13, 03:38 AM
Also got my alt and tensioner setup from fierorog. Fitment is great. You should very seriously consider creating 4t65e trans bracket adapters. I'm sure your more than skilled to whip up something and sell them to the masses. They are in demand and no one wants to pay WCF's asinine price

------------------
11.8@115mph 1/4 mile 1999 Regal GSX being demodded for swap into a 87 Fiero GT.
11 sec pass>>http://www.youtube.com/watch?v=SQT4X2eBlR8

Robertzep2 APR 13, 02:37 PM
I too ordered and installed the lower Alt mount with dogbone. This is some nice stuff, well made, and really quick shipping. I am pleased to have one more thing off the list of my project. Thanks Roger!
Corpsmen Ed APR 13, 08:00 PM
I'll be waiting on those 88 mount brackets for the 3800 SC. Will also need the ALT relocation bracket.

Will you have the brackets for the 4T65E/4T65E-HD as well?
ccrook19 APR 13, 08:34 PM
+1 for these Great fitment and Easy installation!
ironhead.76 APR 13, 08:58 PM
Also waiting on 88 motor mounts. Also need a alternator relocation for 98 alternator. Is the flywheel balanced to l67?
Fierorog APR 14, 07:13 AM
88 engine mount coming soon. Yes I can balance the flywheels to the L67 or the 3800na engines. Thanks, Roger
Corpsmen Ed APR 16, 10:20 PM
Bump.

Get to crackin' on those mounts for the 88, Mr!

And whip me up some for the 4T65E-HD, puh-leeeeaaase!
Fierorog APR 20, 09:41 PM
PM sent