I built this custom Y pipe and exhaust for my 2.8 back in the day. It has been sitting in my basement for a while and I was going to scrap it but figured maybe someone wanted it. It uses a Borla XR-1 muffler and it is pretty loud but sounds amazing.

Exhaust is constructed from 2.5" mild steel and it is in great shape, I can provide more pics. Needs a new coat of paint or to be coated. You will need to do a custom mounting job to the cradle, but it is very easy. There is no EGR provisions, no cat, and I have no cruise control so I am not sure if it would interfere with that. Oxygen sensor harness needs to be extended. Fits with stock trunk no modifications necessary. Flex coupling to isolate engine movement. Keeps heat away from wiring harness and firewall. Uses standard 2.5" flanges with 3 bolts, can find the gaskets for it anywhere. Should work with any transmission. Uses the stock mating parts from original exhaust so it mates to stock headers without issue or leaks. The Y pipe has far superior flow to a stock exhaust. Pics of it on cradle are from when I removed it.











I am not asking to get paid for the exhaust, I just want to be compensated for shipping. If you are local to the NH/MA area then you can come pick it up for free. I am building a new exhaust for my LZ9 so I have no use for it and don't want to see it go to waste.

[This message has been edited by zkhennings (edited 12-13-2022).]

[This message has been edited by zkhennings (edited 12-15-2022).]