2.8L Engine, 3 speed auto, and stock exhaust for sale (Page 1/1)
MichiganReefer APR 30, 03:24 PM
I've gotten far enough into my engine swap so that I can get rid of the stock powertrain and everything I no longer need after the swap. I have a 1988 stock 2.8l v6 still mounted to the 3 speed auto. As well as the exhaust. I did have to pull some parts off them for my 3800 swap. The list to the best of my memory is the engine harness, AC soft lines, and the driver side halfshaft. The powertrain was running when I pulled it to begin my 3800 swap. The engine has about 63k miles on it and did have some trouble keeping idle that I didn't bother diagnosing because I was doing the swap- its been sitting for about 16 months since it last ran. $400 takes it all, OBO. Located Metro-Detroit area. Plymouth, MI

[This message has been edited by MichiganReefer (edited 04-30-2023).]

MichiganReefer MAY 13, 06:23 PM
Dropping price to $300!
MichiganReefer JUN 22, 08:21 PM
$250 OBO now. Ask me for any parts on this and I can part it out. I will probably only hold onto it for a little while longer before scrapping it.
DougKraft JUN 23, 07:44 AM
Would be interested in the silver vacuum lines on the top of the motor. Please PM me Thanks
MaxxPower1968 JUN 23, 11:01 AM
I'm interested in the upper plenum if you decide to remove the vacuum lines.
MichiganReefer JUN 23, 05:05 PM
Sent PMs for the intake plenum and the vacuum lines
MichiganReefer JUN 27, 03:16 PM
The upper intake plenum has been shipped out and accounted for. Any other parts anyone else would like off of it?
BabyEating Dingo JUL 08, 10:14 AM
How much for exhaust manifolds?
MichiganReefer JUL 10, 05:08 PM
I probably could get rid of those for 100 plus shipping. Or if you're able to make it to the 40th I can bring them in person (I'm local to the Detroit area).