Enterra interior (Page 1/1) Bluwolf JUN 29, 08:48 PM Fiero Enterra Interior. Fiberglass is in good shape, but obviously everything needs to be recovered and upholstered. Due to dash and center council being one piece, not willing to ship. $550 consider trade for Keith Goodyear taillight lens or 86-88 Gt Led Taillights located SW Minnesota, 1hr from Sioux Falls Sd[img]https://images.fiero.nl/userimages/Bluwolf/Screenshot_20230629_ 194252_Facebook.jpg[/img] mmeyer86gt/gtp JUN 30, 01:39 AM does the dash mount onto the stock dash or replace it? Got more pics of the rear of the dash? Bluwolf JUN 30, 07:55 AM I never tried or had it into place, but From what I can tell, it mounts in front of the stock dash....the center council gauges/radio/hvac mount to the fiberglass. the main gauge cluster looks like it stays in place, but you remove the shroud from around it... ace5514 JUL 01, 12:57 PM Too bad you couldn't pull a mold off the dash / center console section. you might be able to make some money there. Easy dash mod! The door cards are ehh. mmeyer86gt/gtp JUL 10, 12:50 PM is the entire dash one piece or is it in pieces. what does the structure left underneath it look like? Bluwolf JUL 10, 08:49 PM The main dash and center council are one big piece. Where the gauges are, are face plates. So you could make different ones if you choose to. The center council uses the same one as the fiero for your shifter. It basically mounts in front of the fiero dash and sets into place where the middle council is/was