WTB GT deck lid vent mounts (Page 1/1)
mrroy61805 JAN 24, 10:18 AM
Looking to buy both deck lid vent mounts for a GT if anyone has some. I'm also looking for the rear plastic inner fender . Thanks in advance for the help!


Vr,

Roy
Additivewalnut JAN 25, 11:48 AM
Is the liner the same for all fieros? I've got some 86 SE ones laying around.
87GT3800SC5SPD JAN 26, 01:48 PM
There is a pair listed on eBay today for $28

https://www.ebay.com/itm/16...qTT2kNlvpcpzlRkk3qYF Z6mszjcm8CJj6QM4meVg3fqcLj40iuQ464ow8uKlctAazZ9bZr5IDJc%2FczdHt5zAs488B2Jw1u1NLTJGC7U9LGnKzqbGBIL40Law9tE76sjwxSM7MtAA%3D%3D%7Ctkp%3ABk9SR_Sll--oYw

------------------
Bill Levin

Larry Hubbert JAN 27, 12:49 PM
The mounts of the pix posted on eBay do not appear to be for the Fastback style GT. but those of a regular Notchback Fiero. The mounts on the left side of the attached pix are the correct ones and these are off of an 88GT which is a fastback whereas the ones on the right are off a pre 88 Fastback and they both have a different bolt pattern, so it is important to know the correct model year that you need or they will not fit properly.
Larry Hubbert JAN 27, 12:57 PM
The pictures shown of the mounts in the eBay ad do not appear to be the correct Grill mounts for a GT Fastback but rather a Fiero Notchback. I have attached a pix below that shows a set of 88 GT grill mounts on the left and a set of 86 and 87 mounts on your right. Due to the suspension changes made between those model years the bolt circles are different so please know your cars correct model year or they grill mounts will not match up.
87GT3800SC5SPD JAN 27, 02:57 PM

quote
Originally posted by Larry Hubbert:

The mounts of the pix posted on eBay do not appear to be for the Fastback style GT. but those of a regular Notchback Fiero. The mounts on the left side of the attached pix are the correct ones and these are off of an 88GT which is a fastback whereas the ones on the right are off a pre 88 Fastback and they both have a different bolt pattern, so it is important to know the correct model year that you need or they will not fit properly.




Larry,

Good catch on the eBay photos. I have an 87 GT Fastback and my brackets don't match the eBay photos or either of the photos that you posted.

I just got excited to match a desire to find some parts, with a post on eBay that I had just noticed.

Bill

------------------
Bill Levin

fieroguru JAN 27, 06:52 PM
In this picture - all of the brackets are for an 88. The 84-87 use the 3 individual washers and the 88s use the complete ring.

The ones on the left are 88 Fastback vent brackets. The ones on the right are for the notchie.