WTB: Pass Side Outer Door Skin, Driver Lower Rocker Panel (Page 1/1)
Matthew_Fiero JUL 03, 08:39 AM
Hello everyone,

I'm in the process of prepping my 85GT for paint and a few parts I notice are beyond reasonable repair and am looking for the following as soon as possible:

1x Rear Bumper Cover GT/SE ribbed molding
1x RH outer door skin (85-88) any colour
1x LH lower rocker panel any colour


These are additional parts I would really appreciate help to find:

2x or (1 set) rear license plate light housings that mount to the rear bumper (85GT)
2x Front fascia GT ribbed moulding (the little pieces held on with two stems)
2x Front fender rockers (the grey pieces that mount above the lower rocker)
1x Radiator shroud no motor (with aircon single speed motor style)
1x Non-cracked brushed aluminum radio bezel
1x LH doorframe drip rail if not distorted(the metal piece that clips to the a-pillar skin above the door seal)

Some of these parts like the radiator shroud I've been looking for for several years. It would be amazing to get this list completed this year. If anyone could help out (obviously being in Canada would be easier on shipping) I would be so much appreciative.

Thank you for your time.
Matthew

[This message has been edited by Matthew_Fiero (edited 07-22-2024).]

Larry Hubbert JUL 03, 11:48 PM
PM sent
Matthew_Fiero JUL 08, 05:44 PM
Still looking.

I'd really like to source a LH rocker cover in Canada if anyone happens to have one! Maybe in the US if the shipping wont kill me. I wont be able to paint the car without one.

Edit: After hours in a blistering hot garage and a heatgun on full I managed to somehow get the rocker into shape. It actually looks pretty good now. On another note managed to take a door skin off a junk car today so cross two off the list.

Thanks everyone.

[This message has been edited by Matthew_Fiero (edited 07-12-2024).]

Matthew_Fiero JUL 15, 09:02 AM
The following parts are still outstanding.

Needed for this years painting the car project:
2x Front fascia GT ribbed molding (the little pieces held on with two stems) Just one will do as well
2x Front fender rockers (the grey pieces that mount above the lower rocker at the bottom of the fender)

Secondary projects:
1x Radiator shroud no motor (with A/C single speed motor style)
1x Non-cracked brushed aluminum radio bezel

Thanks!
Matthew

[This message has been edited by Matthew_Fiero (edited 07-24-2024).]

Matthew_Fiero AUG 03, 07:41 AM
I get the feeling this is a difficult place to find Fiero parts now. No bites on any posts.