Tail light Restoration Services (Page 1/1) HVLPgeek AUG 29, 11:00 AM OK GUYS, Offering some refinishing/restoration services for you guys with new blemished or old worn tail lights. While I know the majority of the tail light issues are with the GT trim, refinishing the notchie lights is also something I can do. **PRICE** If I am shipped the complete tail lights with housings, the refinish process will cost $450. If I am sent just the lenses, the cost is $350. ---------------------------------------------------- **PROCESS** - Complete lights will be disassembled and cleaned entirely with degreaser. - Colored amber and red marker inside the housing is scuffed and 2k automotive clear coat applied to brighten up colors. - Reflective silver on the housing can be repainted at and additional cost, but is not needed as it will not be seen once the lights are put together. - All old butyl sealant is removed and new butyl tape is applied. - Lights are assembled - Outer lens is sanded with 800grit, and cleaned vigorously with wax & grease remover and alcohol. - Lenses are meticulously taped around the PONTIAC letters and around the clear portion of the lens. - Automotive black basecoat is sprayed, followed by high quality 2k clearcoat - Lights are allowed to cure for 24 hours and then again are sanded smooth with 800 grit to level the tape lines from lettering. - Two more coats of clearcoat are applied (flow coat) to level out the lights and ensure a smooth OEM like finish. Notch lights I refinished. The whole car I painted earlier this year. ----------------------------------------------------------------------------------------------------------------- **TURNAROUND** Turnaround time for completion will generally take a couple weeks, and I do have a full time job and also refinish Fieros (entire car) on the weekends. If interested in this service, feel free to message me on here or send me a Text at 352-809-8923 And if any references are needed, feel free to reach out to Trent at FieroMotive or Todd at the Fiero Farm. Both of them have seen my work and can verify. HVLPgeek SEP 11, 07:00 AM BUMP for anyone looking at getting their lights done