PFF - Pennock's Fiero Forum, PDA Edition

WTB 87-88 Under (Front) Hood Wiring Harness (Page 1/1)

88FormulaDuke

SEP 25, 06:21 PM

Greetings!!

I’m looking for a complete (and as uncut as possible) underhood wiring harness. Including all the lighting, washer pump… etc.
It appears these are basically in two sections, one for the blower/wipers and such, and another for the lighting. I’m needing both, but if anyone only has one, I’ll get that from ya and keep looking for the other half.

Thanks all!
Eric

82-T/A [At Work]

SEP 25, 08:18 PM

If no one responds, reach out to Mike from Mike's Fiero Parts "Boysatt1@gmail.com"

... I've been buying a bunch of stuff off of him lately, he has a lot of Fiero parts stashed away... including harnesses.

88FormulaDuke

SEP 25, 08:33 PM

Cool, thanks for the tip! I’ll keep his info filed away for when I need other parts as well for my daily driver.

hercimer01

SEP 26, 11:52 PM

I have a complete harness with the module and motors. I think the motors need new gears. Not hard to rebuild. One of the headlight connectors has a poor repair and it looks like the horn connector was spliced into. This harness only has one horn. Earlier Fieros have two horns. You will have to reuse the green wire to the passenger side horn and splice it into the 88 harness. I have tested the module it does work. The motors need gears i'm pretty sure.