[This message has been edited by williegoat (edited 06-12-2023).]

Hire a local airbrush artist .....oh, and yer fergetin that redneck flag !

[This message has been edited by MidEngineManiac (edited 06-12-2023).]

The US Flag may be properly displayed in either vertical or horizontal aspects so that is not a problem. It's pretty simple in it's proportions tho the stripe sizes can be a problem on a small area.

https://www.chamberofcommer...sflag/flagspecs.html
"The U.S. flag has a proportion of 1:1.9. Each stripe is 1/13 the width of the hoist and each star is 4/5 the width of a stripe. The union (the blue field) is the width of seven stripes and 2/5 the length of the fly."
2/5=40%
1/13-=7.7%
4/5=80%



It is first necessary to know the dimensions of the vent. Vertical height in your case, would be the 'fly'of the flag. Horizontal dimension would be the 'hoist'.
https://www.inchcalculator....portions-calculator/

Texas flag is somewhat easier.

A vertical Texas flag must be presented with the white portion to the observer's left, always.

"The Texas state flag is the 1839 national flag of the Republic of Texas. The state flag is a rectangle that has a width to length ratio of two to three. It contains one blue vertical stripe that has a width equal to one-third the length of the flag, and two equal horizontal stripes, with the upper stripe white, the lower stripe red, and each having a length equal to two-thirds the length of the flag. The flag has one white, regular five-pointed star. The five-pointed star is located in the center of the blue stripe, oriented so that one point faces upward, and sized so that the diameter of a circle passing through the five points of the star is equal to three-fourths the width of the blue stripe. The red and blue of the state flag are the same colors used in the United States flag. The red, white, and blue of the state flag represent, respectively, bravery, purity and loyalty."

[This message has been edited by maryjane (edited 06-12-2023).]