Hey guys im wondering if camaro (IROC) rims would have the same size bolt pattern as a fiero (84 2m4) becasue im thinking of buying a set of camaro rims for my fiero

thanks,
Matt

nope.
wider bolt pattern

They don't have the same bolt circle diameter, they are larger, I think 115mm as opposed to the Fieros 100mm. So they wont fit, sorry.

They are 5 x 4.75", not 115mm. They are the wrong offset as well.

------------------
1986 SE 350 V8

Check out this website www.wheeltool.com they list all 5 bolt patterns that will work on a Fiero.

All these cars use the same 100mm rim size, same as the Fiero
-------------------------------------------------------------------------
1996-79½ BUICK - Skylark, Apollo

1990-81½ Skyhawk

1990-80 Century (Some 115 mm)

1989-85 Somerset, Regal , Skylark

1988-81 CADILLAC - Cimarron

1996-87 CHEVROLET - Beretta, Corsica

1999-81½ Cavalier

1991-82 Celebrity (Some 115 mm)

1985-79½ Citation

1999-95 CHRYSLER - Cirrus, Sebring (some 4 1/2")

1995-86 Le Baron, New Yorker

1995-85 Le Baron Coupe, Sedan

1986-85 Laser

1999-95 DODGE - Neon, Stratus

1994-89 Spirit

1994-88 Dynasty

1994-87 Shadow

1992 & 88-86 Caravan

1993-85 Daytona

1989-86 Aries, Aries America

1988-86 400 "K", 600

1989-85 Lancer

1996-92 OLDSMOBILE - Achieva

1992-85 Cutlass Calais

1990-82 Cutlass Ciera (Some 115)

1988-81½ Firenza

1985-79½ Omega

1999-95 PLYMOUTH - Breeze, Neon

1997-86 Voyager

1994-89 Acclaim

1994-84 Sundance

1988-85 Caravelle

1989-86 Reliant, Reliant America

1998-85 PONTIAC - Grand Am

1999-81½ J-2000, Sunbird, Sunfire

1990-82 A-6000 (Some 115 mm)

1988-84 Fiero

1985-79 Phoenix, Ventura

1999-94 SUBARU - Impreza

1996-90 Legacy

1992-83 TOYOTA - Camary

1997-93 VOLKSWAGEN - Corrado, Golf, Jetta, Passat

------------------
Bobby from NW Indiana
86 Fiero GT, Looking to ad a 93 Northstar soon
thespeedshop@sbcglobal.net

One thing to keep in mind when you look at that list is that the Fiero should use a hubcentric rim. Not all those rims have the right size hole in the center for the hub to fit in the rim. Some of the rims will need to be machined out some to fit and some may need to have a hubsentric ring made for the rim.

------------------

Rickady88GT QuadCam 3.5 V6

You notice there all FWD. Subaru WRX rims also fit with a little grinding. I just got a set I also need to modify my axles cause the threaded stubs are too long.

------------------
85 GT 4 speed 2.8L auto X'er

[This message has been edited by red85gt (edited 03-16-2004).]