O.k I am about to replace my coils and wires and i was looking a the old ones and i think that they are routed(sp) wrong. The coils and the plugs don't line up so can someone show me in a fiero how you routed your wires with coil placement also.

What do you mean "routed". Are they going to the wrong plug?

------------------

" DRIVE IT LIKE YOU LOVE IT"

I think so. I looks like he wired it like a stock gp but our engines and reverse. so instead of it going from coil 1 to cylinder 1 it is going to cylinder 6. The number on the coil and the number for the cylinder don't match up but the are exactly oppisite.

The pac in the middle is 2 and 5 and the one nearest the connetor is 1 and 4

Cylinder one is still on the belt side, but its opposite the fiero, meaning firewall side. Dogbone is 2, mid-fw is 3, etc. Then just match the number on the coils.


figure the firewall is where the coils are.

[This message has been edited by Jncomutt (edited 07-17-2007).]

Thanks john that helps alot.