does anyone have this bumper on their car if so any ideas on a bracket to hold the foglights?

I made brackets out of sheetmetal & glassed them into place, Sorry I don't have any pics of them.
~ Paul
aka "Tha Driver"

Hey Leroy, what'cha doin' dragging that chain across the floor?
Leroy: "Ever tried *pushing* a chain?"

still need some help with mounting fog lights

Do you have any fiberglassing skills?

I have the car apart now, & the didgital camera working on another computer. I'll take a couple pics & email them to you, & you can post them for every one else to check out. PM me your email address.
Later,
~ Paul
aka "Tha Driver"

I used 4" joining pipe from Home Depot. I glued the pipe to the fiberglass bumper and spray painted in the interior semigloss black. It worked great.

What size lights did you use?

hella 50mm fog lamp part # hl21530

I am using the APC 4" (505007C) fog lights. When I asked the kit car guys how to mount the fog light, the best idea I heard from the 4" joiner tube. In the picture you can see the tube and the other project I was working on at the time. I did use a whole tube of caulk to hold both of the joiner tubes in. I have some other pictures somewhere. I will try to find them later.

http://brastic.com/fiero/build76.jpg

A + for you both!

John

When you are talking "joiner tubes", do you mean couplings for 4" black ABS piping?

my fog lights have a square bracket that the light is attached to that is used for mounting so if i use the tubing i would have to get the bracket off and try a different way to attach bracket to tubing. whats up with the caster wheel?

The front end of my car is very low. We build a subframe with the castor wheel to get over driveways.

Thats cool idea