Pennock's Fiero Forum
  Technical Discussion & Questions - Archive
  Size of the harmonic balancer bolt

T H I S   I S   A N   A R C H I V E D   T O P I C
  
Email This Page to Someone! | Printable Version
Size of the harmonic balancer bolt by Arns85GT
Started on: 03-30-2009 09:09 AM
Replies: 5
Last post by: Patrick on 03-31-2009 09:54 PM
Arns85GT
Member
Posts: 11159
From: London, Ontario, Canada
Registered: Jul 2003

Feedback score: (1)
Leave feedback





Total ratings: 202
Rate this member
Report this Post03-30-2009 09:09 AM Click Here to See the Profile for Arns85GTSend a Private Message to Arns85GTDirect Link to This Post
Hi guys,

The center bolt on my project 2.8 harmonic balancer is missing.

The listing in the factory parts manual is for a "Torsional Damper" bolt with a heavy washer, but it doesn't list the bolt size.

The part number is 14001828 and the washer number is 14001829.

Can anybody help me with the bolt size?

Thanks,

Arn
IP: Logged
PFF
System Bot
valiantfiero_01
Member
Posts: 76
From: renton, washington, us
Registered: Mar 2009

Feedback score: N/A
Leave feedback

Rate this member
Report this Post03-30-2009 07:27 PM Click Here to See the Profile for valiantfiero_01Send a Private Message to valiantfiero_01Direct Link to This Post
I just replaced mine and I have to take it off again to replace the balancer so I can mesure it when I get home from work
IP: Logged
Arns85GT
Member
Posts: 11159
From: London, Ontario, Canada
Registered: Jul 2003

Feedback score: (1)
Leave feedback





Total ratings: 202
Rate this member
Report this Post03-31-2009 01:06 PM Click Here to See the Profile for Arns85GTSend a Private Message to Arns85GTDirect Link to This Post
For anybody else here it is after some efforts.

12mm x 1.5 x 70mm

The washer is a problem. It needs to be very thick to withstand the torque.

Hope this helps somebody other than me.

Arn
IP: Logged
valiantfiero_01
Member
Posts: 76
From: renton, washington, us
Registered: Mar 2009

Feedback score: N/A
Leave feedback

Rate this member
Report this Post03-31-2009 02:25 PM Click Here to See the Profile for valiantfiero_01Send a Private Message to valiantfiero_01Direct Link to This Post
Cool you got it! I just woke up and was gonna post it but you beat me to it!
IP: Logged
Electrathon
Member
Posts: 5241
From: Gresham, OR USA
Registered: Dec 2002

Feedback score:    (39)
Leave feedback





Total ratings: 254
Rate this member
Report this Post03-31-2009 09:38 PM Click Here to See the Profile for ElectrathonClick Here to visit Electrathon's HomePageSend a Private Message to ElectrathonDirect Link to This Post
 
quote
Originally posted by Arns85GT:

The washer is a problem. It needs to be very thick to withstand the torque.

Arn


I have the correct washer I will send your way for a $7 paypal. It is powder coated in semi-gloss black. If you want to come and pick it up you can have it for $2.50 cash. Likely cheaper to send it.
IP: Logged
Patrick
Member
Posts: 38386
From: Vancouver, British Columbia, Canada
Registered: Apr 99

Feedback score: (1)
Leave feedback





Total ratings: 465
Rate this member
Report this Post03-31-2009 09:54 PM Click Here to See the Profile for PatrickSend a Private Message to PatrickDirect Link to This Post
 
quote
Originally posted by Arns85GT:

The washer is a problem. It needs to be very thick to withstand the torque.



Wouldn't several thinner washers be acceptable in a pinch?
IP: Logged



All times are ET (US)

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery
Real-Time Chat | Fiero Related Auctions on eBay



 Copyright (c) 1999, C. Pennock