quote Originally posted by dobie1: I am really sorry to have to do this to anyone but , Caution to anyone thinking of dealling with Dan Mcllmoyle "FIEROFLYER" I sent him $550 dollars along with my 3800 wiring harness and computer over 4 months ago. He told me it would be a couple weeks to do the new harness up and reprogram the computer. He has moved will not answer emails and the phone number he gave me is disconneted. This amounts ot fraud over $1000 dollars in Canada

Although Dan told you a couple of weeks and you still have not recieved anything I wouldn't get too upset just yet. He told me the same thing back in January. I didn't get it until late april but I did get it. He does not communicate very well or give status updates and I know that he just moved as well. He was extremely backed up with orders due to people just sending him harnesses and money orders without even talking to him first. Try getting ahold of him on (I think this is it) gtfieros.com you might get better results.

There are two resistors wired into the stock harness (one a few feet from PCM connection, the other near the ICM). Do either of these have to be kept?

Those are not resistors.. Some of the stock 3800 harness had diodes to prevent noise feedback ( spikes ) to the PCM. They are in the AC comp circuit. You also might be confusing a splice pack with a resistor. There are ground splice packs, pink wire switched 12 volt, and 5 volt reference.

http://www.fastfieros.com still doing wiring too..

Ya I think your right about the splice packs. They are both located on ground circuits. I guess I will just chop them out and free up those last few tangled wires.