Guys, what kind of grease is used in fiero steering racks?

Thanks

not sure - but I used plain old "axle grease" like what is used for the front wheel bearings

quote Originally posted by Pyrthian: not sure - but I used plain old "axle grease" like what is used for the front wheel bearings

Same here. Go to Canadian Tire and get this (I use this to grease everything - it's pink)
http://www.canadiantire.ca/...2B300g.jsp?locale=en


------------------
My World of Wheels Winners (Click on links below)

3.4L Supercharged 87 GT and Super Duty 4 Indy #163

[This message has been edited by fierosound (edited 07-29-2010).]

Last one I took apart had black graphite grease in around the pinion and and bit at the other end's plastic bushing. Looked like the same grease used in CV joints. That rack was Asian and not GM.

Pete

I used wheel bearing grease as its waterproof, takes heat well and is long lasting.

------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, 3.4" Pulley, N* TB, LS1 MAF, Flotech Exhaust Autolite 104's Custom CAI 4T65eHD w. custom axles, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "

The service manual mentions anhydrous grease. But realistically, any decent-quality grease should work. Graphite or moly grease should be more than adequate.