Post your wheel sizes and offsets with photos. I don't need any of this info since I have an '87 IMSA but recently there have been nothing but aftermarket wheel questions, here and in General Chat. Help them out in this thread and also for the future new members.

I appreciate the contributions. Thanks guys/gals.

1988 coupe turned Gt


VMR V710 5x112 Audi Wheels
18x8.5 45mm offset Fronts
19x9.5 33mm offset Rears


Nitto Invo
235/40/18 Front
275/30/19 Rear (being replaced with 275/35/19s soon)


Front Suspension
Custom 5x112 rear hubs machined to fit front knuckles, spaces wheels out another 7mm over stock
Custom billet caliper bracket for new offset and 12" rotors


Stock rear suspension with the toe off a little on the driver side
*edit* Does have coil overs, but the links and offset is stock


I feel the front sticks out a little and have considered redrilling stock hubs to pull the wheels in, but I have also since found 18x8s by another company that look identical that have the same 45 offset to pull them in even more.



Any questions just ask!

Chris

*edit* Forgot the rear clearance shot

[This message has been edited by eph_kay (edited 09-10-2011).]

quote Originally posted by eph_kay:

Thank you for the info.