Adding pictures of how the mirrors look as a whole. I only hope the moulding tape used is strong enough to keep the mirrors in place. I really worry about the stainless ones over the engine as they will get hot and reduce the tape's effectiveness.

[This message has been edited by grsychckn (edited 04-27-2012).]

Shaping up to be one classy looking ride!

Thanks! I wanted to wait until Carlisle to show off, but here is my latest addition.

Tried to charge the AC last weekend before the Indy show. Pulled vacuum on the system for over an hour, then hooked up the R134a can and let it equalize into the system. Unfortunately, when I turned on the AC to max the compressor never engaged so I guess I have an electrical issue to sort out. I'll have to trace that pesky wire back to see what I need to change.

On another note, I have another new addition. Made this last weekend.





Also made a custom Android app that puts the tablet in a "kiosk" mode and requires a password to see the menu buttons. Taking this with me to Indy. The base is actually a Kobalt storage utility hook I found at Lowes. It took me an hour at Home Depot and an hour at Lowes before I found this thing. It's about 9.5" wide at the base, so I can roll my tires on top of it without it touching my wheels. Here's the link to Lowes (item page). Not bad for $10 + ~$40 for the aluminum. The top is a Nexus 7 locking mount from RAM-Mount for $58 (item page).

Sorry I am late to this...
velcro the mirrors over the engine bay. I put it on all my pieces.
Plus take them off untill a show and they stay clean(er)

[This message has been edited by revin (edited 06-25-2013).]