Hello, I'm going to use the template Fierosound drew up . If he's ok with it.. I'm making a set in 6mm thick abs plastic.. and while I have the machine set up.. I can punch out sets.. should be able to offer them at 19 dollars shipped to the lower 48.(the more made the lower it goes) canada and the last 2 states,overseas would be whatever shipping would be over the basic shipping.. I'm not looking to make money on this.. but others might want to use the 5.25 speakers in the dash .and while the machine is set up. it's easy to just keep punching them out.. they would not have the speaker mounting screw holes drilled, as most 5.25" speakers have the mounting screws in different pattern.. the tweeter hole would not be punched for the same reason.. to many different sized/mounting patterns. but I could cut whatever hole needed if the end user doesn't have a holesaw set to cut it.. I'd just need the size hole wanted..if any..
again if FIEROSOUND is ok with me using the template.. I'll punch out sets for whomever wants one.. let me know if you'd be interested in a set so I can get an idea of what a first run would be.. as I'll be making 2 sets anyways one for my fiero and one for my 86 monte SS rear deck..
mod's if this is against forum rules let me know and remove post..
** NOTE every sale 3 dollars will go into the forums "buy me a beer" support fund.. as this place has been a great help for me. and I only been here a month..
thanks for reading..
------------------ Is there anybody listening? Is there anyone that sees what's going on? Read between the lines, criticize the words they're selling. Think for yourself and feel the walls become sand beneath your feet
[This message has been edited by E.Furgal (edited 04-11-2012).]
should have the first one out to test by tuesday.. if everythings good.. it'll be pnch them out.. week end I'm working the boston marathon.. so I'll get nothing done as far as test fit. till after monday
IP: Logged
09:45 PM
TXOPIE Member
Posts: 2734 From: Leonard, TX, USA Registered: Mar 2012
should have the first one out to test by tuesday.. if everythings good.. it'll be pnch them out.. week end I'm working the boston marathon.. so I'll get nothing done as far as test fit. till after monday
Maybe you should have checked with Tony first before you use something he offered to the community free of charge.
Bad form.
Dr. W.
IP: Logged
10:49 PM
E.Furgal Member
Posts: 11708 From: LAND OF CONFUSION Registered: Mar 2012
Maybe you should have checked with Tony first before you use something he offered to the community free of charge.
Bad form.
Dr. W.
few things.. 1) read the first post.. read it 2) I p.m.'d him and asked for his ok.. he says no.. then I make plates for my cars only 3) I can make plates for my car as he clearly says in his thread it's ok to use the template..
so. your way way of base.. if he says he's not cool with it. thats fine.. I just want to figure out how long I'd have to tie up the machine to make them.. and to top it off, I would be selling them at cost.. no profit.. the money for the "buy me a beer wasout of my pocket sorry, I just figuredif I'm gonna have the machine ready to go.. might as well punch out set for whom ever wants them.. steppng on toes was never in this.. and why I p.m'd him and listed in post waiting for his BLESSING
so, really ,who's got the"bad form" as seen as I made it clear inthe first post that I'm waiting on the ok from fierosound..
but thanks for the post TTT
[This message has been edited by E.Furgal (edited 04-11-2012).]
IP: Logged
11:07 PM
E.Furgal Member
Posts: 11708 From: LAND OF CONFUSION Registered: Mar 2012
Maybe you should have checked with Tony first before you use something he offered to the community free of charge.
Bad form.
Dr. W.
THE P.M. BACK FROM fierosound
Not a problem. Go for it.
Tony
----- Original Message ----- Hello.. I'm going to be use'n 5.25 in the dash and useing your template.. I am able to make set of these while the machine is set up.. are you ok with me making extra sets and selling them to members at the cost .. I'm not out to make money.. but while I have the machine set up.. I might as well make extras.. but you drew up the template and figured it was only right to ask you first.. let me know if you have an issue with me doing/offering them.. they'd be 6mm(just under1/4") thick
All times are ET (US)
THANKS TONY, i'M SURE the members that get these thank you too..
IP: Logged
11:15 PM
Apr 12th, 2012
Scottzilla79 Member
Posts: 2573 From: Chicago, IL Registered: Oct 2009
ok should have by end of week, a few sets done, going to test fit them to make sure I didn't oppie somewhere.
then anyone that wants them, I'll p.m. and we go from there.. as I'll need to know if you want the tweeter hole cut or not, and what size.. photo's when it's popped out and one in the dash..
IP: Logged
06:43 PM
gtophil Junior Member
Posts: 3 From: Gainesville GA Registered: Apr 2012
You might consider posting a thread in The Mall, or having Cliff move this one over for you... there may be some interested parties that don't pop into tech often that would like this product! (I am one... but saw a link to this thread from a fierosound thread in TCZone)
Just thinking out loud... you could probably also sell some units to TLG or The Fiero Store... this seems like something that would be in their wheelhouse.
edit... nevermind... I saw you were selling these pretty much at cost (+ a beer for our esteemed host). Very nice of you.
[This message has been edited by blakeinspace (edited 04-18-2012).]
have two sets of test adapters in hand, will be test fitting them this w end.. if weather plays nice... I'll post pic's soon.. looks like I should beable to do this for 19.75 shipped to lower 48.. canada, over seas would be quotes..
[This message has been edited by E.Furgal (edited 06-12-2012).]
as you can see, the first one has 4 oval holes and the 2nd one does not.. the speaker mounting holes are "slots" instead of holes, because not evey 5.25" speaker has the mounting hole in the same spot.. I did not cut holes for a tweeter, as there are to many different sizes, one size does not fit all.. and if you want to run coaxle speakers instead of seperates, or want to mount the tweeter in a different location.. I can cut whatever size hole for a tweeter that you want, as long as it's a common hole saw/drill size.. that be a case by case, per order thing, cause the 3 different sets of seperates I have here, the tweeter mounting hole is totally different.. the outer speaker mounting holes, pull double duty, and hold the plate to the dsh, the inners, you'd be use'n the speaker hardware.. if the hardware is bigger than the hole size (iirc 3/16th) you must pre drill the hole to a larger size, skipping this isn't a good idea.. I'm also going to use 3m weatherstrip adhesive around the woofer where it meets the plate. as it's only 1/8" in width at 2 points and I hate chasing rattles,, it's not "needed" but . it's silly to chance it.. the 5.25" speaker mounting hole requirement can't be 4 3/4" or larger without making the hole so big that the bracket would be two pieces.. crutchfield.com list speaker mounting hole size for any speaker, including disco'd models, if they carried them...
I will hopefully be test fitting these into my fiero tomorrow, as I'm off from work, and wife will be picking up her parents at airport, so I'll not be interupted.. I'll photo that and post.. it looks like 16 sets are wanted... if you want a set.. please p.m. me with your e mail address and any shipping info.. I'll need.. and if in canada/overseas or the upper 2 states.. the info I'd need to get a shipping quote for you.. I'll send out pay pal invoices only after I test fit them and I have all the requested sets made.. if you don't want to do pay pal. thats fine . a postal m/o(u.s.a.) will be fine, personal checks ok too.. after they are sent out.. I'll add the amount to the forum "buy me a beer" forum fund... please be advised.. my work has inventory next week. and the machine to punch these out is 2 states away from my house (I'm in new england, so that isn't really that far lol) punching them out might not be for a week.. please remember that... just want to be upfront with everybody.. so no one is bent out of shape if ,they are not done untill end of next week.. have a great day..
------------------ Is there anybody listening? Is there anyone that sees what's going on? Read between the lines, criticize the words they're selling. Think for yourself and feel the walls become sand beneath your feet
test fitted them.. going to be punching them out next week end, but it's also mothers day so.. they should be ready to ship by the 15th/16th (fingers crossed..)
taking a head count.. for sets,,
IP: Logged
04:58 PM
E.Furgal Member
Posts: 11708 From: LAND OF CONFUSION Registered: Mar 2012
they are done.... I'll be sending out the info to your emails this w end and ciff I'll be buy you some beers.. there are 27 set's, well 26 one set for me.. was going to use a set in my g body (monte SS) but going with steel as the spacer/adapter causes the 5.25" to hold up the reardeck panel and it looks a little odd, make the panel look like it's wavy from getting wet..
DJErikd paid.. will send out monday morning thanks
if you didn't get an invoice.. it's because of one of a few things.. but you might have a p.m. if I didn't have an emaill addy or a shipping addy you got a p.m. if I got down the list and have the 27 sets spoken for.. I didn't send you an invoice.. I'll be running another batch..soon.. monday or tuesday..
IP: Logged
04:57 PM
E.Furgal Member
Posts: 11708 From: LAND OF CONFUSION Registered: Mar 2012
IF YOUR NOT ON THIS LIST AND WANT A SET.. p.m. me.. and post here please @@@@@@@@@@@@@@@@@@ fiero sound gets a set for being nice enough to let this happen@@@@@@@@@@@@@@@@@@@
[This message has been edited by E.Furgal (edited 06-04-2012).]
IP: Logged
05:11 PM
E.Furgal Member
Posts: 11708 From: LAND OF CONFUSION Registered: Mar 2012
if you are on that list and have changed your mind please p.m. me also..
any of the ones I don't here from in a week.. the hold will be lifted and I'll offer them to someone else.. the plan is monday or tues to punch out another 10-12.. to cover everyone..
and then seen cliff some money for beer lol next week.. thanks all...
IP: Logged
05:22 PM
Raydar Member
Posts: 40925 From: Carrollton GA. Out in the... country. Registered: Oct 1999
<---- did you buy Cliff a beer? 
