On the distributor there are 6 wires on one connector. 4 go to a 4 terminal connector into the harness, where do the other two go? On appears to be black, the other grey. Mine are cut, and can't remember why when we removed the wiring harness. Thanks!
IP: Logged
05:26 PM
PFF
System Bot
phonedawgz Member
Posts: 17091 From: Green Bay, WI USA Registered: Dec 2009
There are only the 4 wire connector from the engine harness that runs to the ICM
Ok they come out of the distributor, but where do they go then? They are like 5 inches long roughly. they are both dark colored. I see the connector that goes into the distributor, but it also has those two extra wires that come out of the distributor, but I don't know where they go. There are a total of 6 wires coming out of the distributor.
Looks like an 84 distributor? The coil on the 84 has 4 wires, black, brown, black with a pink tracer, and a big pink one.
Yes 84. Which colors go together? I have an accel super coil. I think po spliced the pink and ?? Wire into an orange up to the coil and a black with the other one into a yellow wire.
