where can one find a replacement retainer clip for the throttle cable and tv cable for the v6? are they available at most parts stores or just special order...

I can go down to the scrap yard and get the one from an 85 GT. I cant remember if there's still one on my junk engine in the garage. I will look. If someone else has one, by all means.

quote Originally posted by hercimer01: I can go down to the scrap yard and get the one from an 85 GT. I cant remember if there's still one on my junk engine in the garage. I will look. If someone else has one, by all means.

thank you, i will check some parts stores tomorrow too

a C clip of the right size from any hardware store will do in a pinch.
But I would still try to find the correct clip for safety.

When I lost mine I bought several E clips from my local hardware store until I found one that fits. Also, the auto parts stores have assorted E clip packs. E clip is a C clip with less material. Works the same.

quote Originally posted by Hudini: When I lost mine I bought several E clips from my local hardware store until I found one that fits. Also, the auto parts stores have assorted E clip packs. E clip is a C clip with less material. Works the same.

I was thinking the same thing... I will check with Napa tomorrow and maybe the dealer. I will post what I find...

I believe that Dorman/Helps sells these clips in a bubble pack. Look in their online catalog.

------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Powerlog manifold, Northstar TB, LS1 MAF, 3" Flotech Afterburner Exhaust, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "

C & E cli[s will work in a pinch to keep the cable in place; but they won't take up any slack. The stock clips lock the cables in place and pulls them forward as well...