I was looking on eBay and came across this.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=1855082405

IS this true?

Do Neon / Celica GTS / PT Cruiser wheels fit a Fiero? If so... do they fit well?

Doesn't someone on here have a WRX's wheels on their Fiero?

Apparently so, but why would someone put rims on their car that has a Toyota logo? :P

I was thinking more along the lines of aftermarket wheels...

Any wheel with 5/100 bolt pattern and correct offset should fit. The chrome PT Cruiser wheels look nice. Also, they don't have an emblem. Anyone got a set on their Fiero?

Rick 88
My rollers are:
17x7.5 .40 offset ALT AT-148 wheels
215/45/17 front and 245/45/17 rear Falken ZE-502's

5x100 that includes Jbody cars cavalier and sunfire. i gotta try that. my 15" z24 rims would look awfull i bet. but hey 13" rims look too bitty

------------------
2000 NBM(navy blue metallic) Camaro SS/6M/TT

*NEW* 85 Fiero(SE/GT)?5M

93 3.1L Z24(dead :( and parting out) 5M

16" PT Cruiser wheels on forum member andrewbreens 87 GT 5 spd.

------------------

1988GT T-Tops, 5spd, everything but power seat

According to the ad the Celica rims were machined in order to fit the PT Cruiser, Neon, and Fiero. So no the Celica rims do not fit the Fiero.

2001 17" Celica rims on a Fiero,

I'll ask the owner if he has any better pics, and if they are factory Toyota rims.

I believe he said they were a direct swap.

Most subaru rims will work. They have 12mm more offset which means means your track will get narrower.

I've got a pick going the other way though.

It's funny, a lot of people at the track were checking out the fiero rims on my subaru last weekend.

------------------

These are Chrysler polished 14x6.5 wheels.

------------------
George Ryan
Performance Director
CFOG-I

The pic of the black car with the Celica wheels that I previously posted, they are aftermarket.

Just talked with my buddy, and yes they did come off a celica, but they are aftermarkets.

Being aftermarket, they probably have the correct spacing to fit several makes.

Sorry for any confusion.

[This message has been edited by jelly2m8 (edited 09-01-2002).]

These wheels have been modified by increasing the center bore size (by 3 mm) to fit the Fiero, Neon and PT Cruiser. This is done in a machine shop to very high tolerances and does not affect the strength of the wheel, nor the look of the wheel. However, because of this, these wheels will not fit the Celica. Check out my other auctions for these wheels for the celica.

so, Celica wheels arent a directs swap but have to be modified ever so slightly. Personally, i like the look of them. Just get decals to go over the Toyota emblem. If i got em, it paint over the "T" and get the little fiero logo stickers that come on GT rims and stick em on for a factory look

------------------

--Adam--
1987 Blue GT 5-speed
IM AOL: GTFiero