Hey, its now time for me to throw on my side scoops. The ones from Pat that replace the sail panel windows. I am wondering if you can let me know how you did yours. I want to smooth them in, I hate that little ridge. I tried at first some 3m double sided adhesive tape, but they didnt hold at all. Then I tried some silicone, and same thing. The silicone was a stupid idea. In retrospect I have no idea why I tried it. So I ended up just putting in pop rivets. I dont want to keep the rivets in there though. To fill over top the rivets with fiberglass bondo is a pain.
So I went and bought some fiberglass bondo, and I was going to just fiberglass over them. hoping that would keep them in there, but then I thought, what about shifting of the car. Would that crack the fiberglass bondo around the scoops? Should I attach them somehow first, and then cover with the bondo? I am not very good at shaping, so I dont want to have to use a lot to cover something like rivet heads, or screws.
Let me know what you did, and what you think I should do.
Thanks man
Jamie Kembel
------------------
87 GT w/T-Tops
If you like what I am contributing, please vote.
j/k you know that!! 
