WOOO looks like someone got NEW DIRT at the house!!!
I will say... The hump above the tire NO !! You need to flatten that out from the door top edge back at an angle to the trunktop edge,so it is more of a straight flat surface on top. How does it look with the "other" thing on there??It would go better with the scoops! (good job anyway!!)
IP: Logged
12:28 AM
Smoooooth GT Member
Posts: 8823 From: Lake Palestine, Texas Registered: Jun 2001
OK Smooth I used to hate your car. I looked through this thread and I love it. I also like the 55 gallon cans of "bondo and Fiberglass" as you must also! Anyway I must say I have new found respect for your work. You do all that work right? Lets buy some paint folks!
IP: Logged
10:04 PM
Smoooooth GT Member
Posts: 8823 From: Lake Palestine, Texas Registered: Jun 2001
This gray GT photo guy gets my vote for the longest body project on PFF. Ed "Big Daddy" Roth cranked out 2 complete fiberglass bodied cars in the same amount of time as this project has consumed.
Meanwhile, if paint EVER makes its to the surface of this gray project car, the owner will have to stop messing around with fiberglass on the body. He's been at it sooooo long this would represent a major change in his life style. I don't think he can handle that!
How right you are there Grasshopper.. But, I did use the Maroon GT for the clip, etc. spring's, rear swaybar, steering component's, etc. So I don't see much in the way of a SE anylonger...
But, you're right...lol
IP: Logged
12:12 PM
$Rich$ Member
Posts: 14575 From: Sioux Falls SD Registered: Dec 2002
Don't take this question the wrong way "Smoooooth GT " but, for how long had you been working on it.How and what kind of exposy, glue, whatever you use to do the body mods.
------------------ " My intention is to " give a different point of view ", not to offend in any way; peace."
Don't take this question the wrong way "Smoooooth GT " but, for how long had you been working on it.How and what kind of exposy, glue, whatever you use to do the body mods.
IP: Logged
03:54 PM
Smoooooth GT Member
Posts: 8823 From: Lake Palestine, Texas Registered: Jun 2001
How and what kind of exposy, glue, whatever you use to do the body mods.
I have used the GREEN styrofoam for the buildup,etc. Then it's shaped and the covered in 6-8 layer's of Fiberglass, then 2-3 layer's of Finishing Glass.... Then just filled with filler...
How right you are there Grasshopper.. But, I did use the Maroon GT for the clip, etc. spring's, rear swaybar, steering component's, etc. So I don't see much in the way of a SE anylonger...
But, you're right...lol
Theres not much Fiero left anymore. Isn't a ricer someone who pretty much says there car is one thing when its something else, like a Kia with a VTEC badge on it? or a Fiero SE with a GT badge on it?
Theres not much Fiero left anymore. Isn't a ricer someone who pretty much says there car is one thing when its something else, like a Kia with a VTEC badge on it? or a Fiero SE with a GT badge on it?
This gray GT photo guy gets my vote for the longest body project on PFF. Ed "Big Daddy" Roth cranked out 2 complete fiberglass bodied cars in the same amount of time as this project has consumed.
