http://www.fieronews.com/files/DevilbeatsRX7.wmv

Thanks to DoTC for hosting the video. Now I can post some of mine!

------------------

1988 Purple Fiero GTw/SC3800 conversion
Best ET with 3.0 pulley,XPHOT cam, SS I/C and 105lb Valve springs: 12.72@109mph
Best 60 Foot ever: 1.735

Nice video. The track is so addictive!

Pete

------------------

BTW, this is with 90 degree temps and he had his street exhaust on. Since then he has made a race only exhaust and turned in 114mph trap speeds with just the swap. He did spin a bit too.

I dont believe it. Its photoshopped. No way a SBC can be beat by a V6!!!!!

------------------
1986 GT, LT1/4T60E
http://hometown.aol.com/ptfiero/index.html
On the forum
https://www.fiero.nl/forum/Forum2/HTML/045554.html
more in depth look
http://dtcc.cz28.com/LT1build/index.htm

YEAHHHHHHHHHHHHHhhh yeah yeah. But it was in a MAZDA, and it definitely doesn't BELONG in THAT!

NOICE

SH

Lildevil's has to be one of the nicest 3800SC cars I've seen. Congrats on the kill.

LMAO, thats true, I thought the SBF's were used in those swaps. What gives?

AWSOME blower whine I would kill to have that sound in my SBC.

Someone tell the announcer to put a sock in it.
Nice run though

thats sweet... ive got a friend thats putting a LS1 into his 1990 RX-7 GTU... its gonna scream, i just hope he can control it. those kits are CHEAP too... you can get them for about 500 bucks and all you need is the motor and trans.

------------------
'86 Fiero GT

My Fiero XoticRydz
Mid-Rear Madness

Mr. Pat, install some Kloyds noisy timing gear sets in place of your timing chain on your SBC, available from Summit of Jeggs, they'll give you a sound very close to the supercharge wine. Summit has their own design:
http://store.summitracing.com/default.asp?target=esearch .asp&N=110&Ntk=KeywordSearch&Ntt=Cam+Timing+Gear+Sets&x=16&y=7

Go to page 4 when link loads.

[This message has been edited by California Kid (edited 10-24-2004).]

Nice run LilDevil!!

[This message has been edited by maryjane (edited 10-24-2004).]

.

[This message has been edited by California Kid (edited 10-24-2004).]

.

[This message has been edited by maryjane (edited 10-24-2004).]

Nice vid, would have been about 1oo,ooo times better if that announcer had shutup for a bit.

--Allen

------------------

Nice kill... keep up the good work.

------------------

[This message has been edited by Nebiros88 (edited 10-25-2004).]

quote Originally posted by maryjane: are you opening it with a text editor instead of a multimedia program?

Windows XP sp 2?
Dump your temp files and try saving in again.

[This message has been edited by California Kid (edited 10-24-2004).]

R-Click, save target as, save it to desktop (or wherever)...It should show up as a valid .WMV file on the desktop...(I don't know why it says it's saving itself as a .txt, but it works for me)..

Brad

------------------

Ohhhhhh yeahhhh!

!

[This message has been edited by maryjane (edited 10-24-2004).]

quote Originally posted by California Kid: Mr. Pat, install some Kloyds noisy timing gear sets in place of your timing chain on your SBC, available from Summit of Jeggs, they'll give you a sound very close to the supercharge wine. Summit has their own design: http://store.summitracing.com/default.asp?target=esearch .asp&N=110&Ntk=KeywordSearch&Ntt=Cam+Timing+Gear+Sets&x=16&y=7 Go to page 4 when link loads.

Awsome, when I drop my motor for a cam swap in a few weeks ill install a set. Anything I should know when I put em on? Its an LT1, does that make a diff? Thanks again mate.

------------------
1986 GT, LT1/4T60E
http://hometown.aol.com/ptfiero/index.html
On the forum
https://www.fiero.nl/forum/Forum2/HTML/045554.html
more in depth look
http://dtcc.cz28.com/LT1build/index.htm

Real nice run LilDevil, you had the guy wasted by half track, looks like he was starting to pull hard near the finish.

Video did download and play even though it appeared to be saving as a text file, thanks Brad for the suggestion to let it load that way.

Mr. Pat, the only thing you should worry about is talking to Tech Support to be sure you get the right set for your engine. Other than that you might get tired of the noise It is a more precise timing setup!!!

Note to others posting help on downloading video, if you could edit your post to delete 'help' to clear up his post, it would be appreciated.

AWESOME!

------------------
Real Sports cars only have 2 seats....

Matching numbers GT
#17889 of 26,402 made in 1988, 1of 241 yellow GT's

quote Originally posted by Mr. Pat: Awsome, when I drop my motor for a cam swap in a few weeks ill install a set. Anything I should know when I put em on? Its an LT1, does that make a diff? Thanks again mate.

i've heard of some people having problems with the timing gear sets due to harmonic imbalance caused at higher rpms. its hard on the valvetrain because of the vibrations. just something to think about.

------------------
88 fiero coupe. 2.8/5 spd (last driven sept 02)
90 eclipse. 4g63t, the replacement for displacement

quote Originally posted by trigger: i've heard of some people having problems with the timing gear sets due to harmonic imbalance caused at higher rpms. its hard on the valvetrain because of the vibrations. just something to think about.

Warren Johnson doesn't think so:
http://www.nhra.com/dragster/1999/issue16/speed.html

more vids are on the way....only reason this one was posted was tosee if we could get it to work. On the way will be a bye run with the open exhaust and a vid with me BARELY beating a 240 SX Turbo. Maybe some burnout videos after the upcoming weekend.

Kudos, LilDevil, it was nice of your cameraman to pull in tight enough to get a shot of the timer boards, too. Helluva run.

------------------

"He who does not oppose evil, commands that it be done!" ----Leonardo da Vinci

Excellent run, congrats on the win.

Dude the Video is nice... Good Work!!!!

Defintly nice, the video has been downloaded 811 times. WoW..

Great video. these are always welcome on the forum

quote Originally posted by Mr. Pat: Awsome, when I drop my motor for a cam swap in a few weeks ill install a set. Anything I should know when I put em on? Its an LT1, does that make a diff? Thanks again mate.

Pat,
Your not goin to be able to use it most likely. They set off enough noise to give your Knock sensor false readings. Good in a carb'd motor though.

------------------
SSFiero@Aol.com Support Mental Health, or I'll Kill Ya!!
Yellow Formula Signature

• 88 Yellow FORMULA
  
• ZZ3 HSR, 345hp, 390lb-ft. Est to be done one of these days.
  
• V8 buildup thread
  
• My Shower Cam

Sweet!

------------------

The Dirty Rat
Chopped, dropped and just plain NASTY! Choptop Targa #1
383 Stroker MPFI with N2O
1" Drop
3" Chop
11" Brakes
19" Motegi Roja's wrapped in BFGoodrich Gforce T/A KDW-2 rubber
RCC Coilover Suspension
Updated Jan 21 '04 www.dirtyratracing.org

GOOD KILL

AWESOME

[This message has been edited by DelawareFiero (edited 10-25-2004).]

That qualifies as a very nice kill.

only a 12.7???

Looks good to me !

Lil, just think how much FASTER you would be if you had a fastback

------------------

98 3800SC, Getrag 5sp. only one around Austin Texas !

quote Originally posted by revin: only a 12.7??? Looks good to me ! Lil, just think how much FASTER you would be if you had a fastback

why - the notchy saves 13 pounds and has a lower drag coefficient

quote Originally posted by Kohburn: why - the notchy saves 13 pounds and has a lower drag coefficient

And the difference is even greater when you have goofy scoops in your fastback windows!!!!!

------------------
-Matthew
87 GT My transportation
86 GT My headache

quote Originally posted by Mr. Pat: Awsome, when I drop my motor for a cam swap in a few weeks ill install a set. Anything I should know when I put em on? Its an LT1, does that make a diff? Thanks again mate.

I'm pretty sure you can't run those with a computer controlled car. It can/will set off the knock sensor. Correct me if I'm wrong - anyone.

Ling has the noisy pete jackson set on a carbed 350 and the exhuast note is the queitest at 2500 and that's when the whine is really at it's peak.

anyone ever notice that i pull in to the parking lot in 1st gear???

i do that for a reason

------------------
_{Buddy Craigg - there are two "G"s in my last name
Ling = 84SE-Modified
Julia C = 85GT stock (kinda)
Ivy = 67 Pontiac Catalina
KCFOG}

Awesome kill man, your car sounds so fricking awesome. + to you for your cool car.

Announcer: Car 772 is Jay...

*Thows rock at Announcer* Shut up dude!!!!