I want to put the mustang type hood scoop on my 88 fomula rear deck lid. Who sells them and what to I have to cut out to help let the heat out? Thanks, Dave
To access your account control panel, please visit: http://66.175.13.112/menu and login using the username and password that you selected when ordering your account.
IP: Logged
02:43 PM
88formttp Member
Posts: 187 From: Las Vegas, NV./ N.W. Indiana, Munster Registered: Jan 2005
Sorry guys, He must be updateing it again/ still keep checking, he has a little write-up about it.
Basicly... an old 80's (mid 80 ) stang scoop is what you need. it is fiberglass, it will glass on the deck lid with no problems. These are the ones that had fake vents on them (just take off the fakes) they even come with studs to make the mounting easy!
Who sells it...I know there are some on here pat at fibersmith is one I think. Lok in junk yards they are on ebay sometimes. maybe try a mustang fourm.
Check out http://www.fibersmith.net/fiero.html I will be getting some parts from him real soon (waiting for next pay-check). His prices are very fair and he has been a real treat to deal with so far.
-Clint
IP: Logged
04:55 PM
PaulJK Member
Posts: 6638 From: Los Angeles Registered: Oct 2001
will this scoop fit on a notchback V6 86 decklid? it has that stupid hump in the middle of it, and im not sure if the scoop would be large enough to cover it
IP: Logged
10:42 PM
3.8 SC Member
Posts: 577 From: On the Great Lakes-Ohio Registered: Dec 2003
will this scoop fit on a notchback V6 86 decklid? it has that stupid hump in the middle of it, and im not sure if the scoop would be large enough to cover it
The scoop will cover were the hump was. I have an 82 Ford Mustang scoop on the back of my Fiero and there is about 3/4" on each side of the scoop. If you want I will post pics after it stops raining and I can get out to my Fiero.
------------------ WWW.CLEVELANDFIEROS.COM https://www.fiero.nl/forum/Forum1/HTML/052322.html#lastpost My rear defuser
IP: Logged
10:52 PM
Jul 19th, 2005
3.8 SC Member
Posts: 577 From: On the Great Lakes-Ohio Registered: Dec 2003
Here are the pics! I thought there was 3/4" But After I modified the hood and took the dimensions all the way to the supports, I have 1/4" lip. Just enough to hide the wiring of my L.E.D. lights that I am working on.
------------------ WWW.CLEVELANDFIEROS.COM https://www.fiero.nl/forum/Forum1/HTML/052322.html#lastpost My rear defuser
so did u cut the whole "hump" out of the decklid? im also not to sure of a way of doing it that will be able to keep the engine bay dry, while still serving as a good scoop. what about leaving some of the bump in the lid there, cutting the top of it out, that way, with the mustang scoop over it, the water or rain or whatever couldnt make it up the incline of the original bump.
You can't really see in the first pic, but there is a screen there. I used the screen mesh from the corner engine cover panels. As for keeping the rain out, I don't open the hood when it is wet. You have to cut the whole hump out or the scoop will not sit flush with the hood.
------------------ WWW.CLEVELANDFIEROS.COM https://www.fiero.nl/forum/Forum1/HTML/052322.html#lastpost My rear defuser
