http://www.rodneydickman.com/RadiatorSplashGuards.html

On my web page now. Very hard to find good used ones anymore for the GT aero noses. This is just the rubber pieces, new zinc plated steel plates and new stainless steel staples. You will be reusing your original hard plastic pieces. You will remove the original staples and put the new rubber pieces on with the new staples by bending the staples with a pliers.

------------------
Rodney Dickman

Fiero Parts And Acc's Web Page:
www.rodneydickman.com
Rodney Dickman's Fiero accessories
7604 Treeview Drive
Caledonia, WI 53108
Phone/Fax (262) 835-9575

Wow! Looks like another nice piece Rodney. Thanks for supplying us with quality replacement parts.

------------------

Visit my website!
David
2 Corinthians 5: 17
1987 Pontiac Fiero GT, 5 Speed
2005 Pontiac Grand Am SE, 3400 V6

ALRIGHT! I was just looking for a set of those, too.

I need a set. Was just looking at what was left of mine.

You are the man Rodney.

Any interst in making the plastic inner wheel weel liners???????

Need those also.

John

[This message has been edited by 1986GTV8 (edited 05-21-2006).]

Great, that looks like something I need. But I have a coupe that was converted to a aero nose. I'm not sure I have all the parts I need. Is there a drawing that shows how this all fits together??

This is probably as close as you're going to get, Jonathan, without somebody crawling under for pictures.


John Stricker

quote Originally posted by jscott1: Great, that looks like something I need. But I have a coupe that was converted to a aero nose. I'm not sure I have all the parts I need. Is there a drawing that shows how this all fits together??

These fit the aero style Fieros. The aero style nose is the type used on the 84 Indy, 86-87 SE's and the 86 to 88 GT.
I will have these available for the coupe style noses later this summer.

What about the 85 GT?

Rodney just forgot to mention it.

[This message has been edited by Blacktree (edited 05-22-2006).]